楼宇型分布式能源系统SCR脱硝数值模拟研究

摘要/Abstract

摘要：

燃气分布式能源系统燃烧产生的氮氧化物难以满足日益严格的环保排放要求；同时，燃气分布式能源系统的结构特点决定其脱硝系统必须紧凑布置。采用Fluent软件对某楼宇型分布式能源站拟建的选择性催化还原脱硝装置进行数值模拟研究，初步引入导流板、整流栅及气流均布板等结构，提出了3种不同的改进方案，定量分析了烟道内的速度场、组分场及温度场的分布规律。结果表明：加装导流板及整流器可有效改善混合器及反应器内流场的均匀性，气流均布板结构促进了第1层催化剂入口断面内流场的均匀性；相比于原方案，改进之后的脱硝装置中NO及NH3在第1层催化剂层的速度、质量分布及温度的均匀度明显提高，且速度不均匀度为20.81%，满足预期设计要求。可为楼宇型分布式能源系统脱硝提供参考，同时也可为系统装置后期的优化设计奠定基础。

关键词:

">">分布式能源系统, 选择性催化还原脱硝, 结构改进, 数值模拟

Abstract:

The nitrogen oxides produced during combustion process of the distributed energy system driven by natural gas are still difficult to satisfy the requirements of China’s increasingly stringent environment emission standard.Meanwhile,the layout of denitrification system has to be compact according to the structural of gas distributed energy system.The software Fluent is used to simulate the selective catalytic reduction and denitrification device of a buildingtype distributed energy station.Flow deflector,aerodynamic grid and airflow distribution board are briefly introduced,and 3 different improvement schemes are proposed.Quantitative analyses on the distribution of velocity,composition and temperature fields in the gas ducts are made.The results show that the flow deflector and aerodynamic grid can effectively improve the uniformity of the flow field in the mixer and the reactor.The airflow distribution board promote the uniformity of the flow field in the inlet of the first catalyst layer.Compared with the original scheme,the uniformity of velocity,mass distribution and temperature uniformity of the NO and NH3 on the first catalyst layer are improved obviously,and the velocity nonuniformity is only 20.81%, which satisfied the requirements.The results can provide reference for denitrification of buildingtype distributed energy system,and set a foundation for the following optimization design.

Key words:

">">distributed energy system, selective catalytic reduction denitrification, structural improvement, numerical simulation

江婷1，2，胡永锋1，2，宋洪涛1，2，李建标1，2，沈建永1，徐静静1，2，张爱平1，2 . 楼宇型分布式能源系统SCR脱硝数值模拟研究[J]. 华电技术, 2019, 41(3): 1-7.

JIANG Ting1，2，HU Yongfeng1，2，SONG Hongtao1，2，LI Jianbiao1，2，SHEN Jianyong1，XU Jingjing1，2，ZHANG Aiping1，2.

Numerical simulation research on SCR denitration in a buildingtype distributed energy system

[J]. Huadian Technology, 2019, 41(3): 1-7.

[1]	蔡雨晴1，杨平1，沈丛奇2，康英伟1，归一数2，徐春梅1. 单相受热管集总参数模型优化及现代控制工程应用[J]. 华电技术, 2019, 41(6): 1-5.
[2]	万立明1，梅振锋2，李德波3，苏朋1，邱家煜1. 中速磨煤机入口紧凑型圆形一次风道流场均流技术研究[J]. 华电技术, 2019, 41(6): 6-12.
[3]	胡美玲1，赵雪瑞2，赵耀丽2. 基于以太网的水电站卷扬式启闭机控制系统的设计[J]. 华电技术, 2019, 41(6): 13-16.
[4]	梁鹏威，康振全，黄浩然，马莉莉，刘洪星，朱朝磊. 基于ANSYS的齿轮模态特性研究[J]. 华电技术, 2019, 41(6): 17-22.
[5]	张巍1a，周国鹏1b，汪洋1a，倪浩1a，钟著辉2. 一起220kV主变压器保护装置发TV异常告警的原因分析[J]. 华电技术, 2019, 41(6): 23-26.
[6]	牛腾赟. 某电厂发电设备可靠性建模及状态预测[J]. 华电技术, 2019, 41(6): 27-32.
[7]	谢坤1,2，赵谦1,2，程成1,2，李帅1,2，蔡亮亮1,2. 具有异常分析功能的通用型数字量输入式合并单元[J]. 华电技术, 2019, 41(6): 33-37.
[8]	苏攀，沈阳，于鹏峰，韩静. 正平衡供电煤耗升高原因分析及煤耗修正计算[J]. 华电技术, 2019, 41(6): 38-41.
[9]	王晓华，谈志林，宫建，李连军. 燃煤电厂氟塑料换热系统的技术经济分析[J]. 华电技术, 2019, 41(6): 42-45.
[10]	徐克涛，何永兵，裴煜坤，张杨. 某燃煤电厂SCR脱硝装置堵塞问题分析及改进[J]. 华电技术, 2019, 41(6): 46-49.
[11]	叶罗，吴俊东，陈显. 低温省煤器系统运行实践分析[J]. 华电技术, 2019, 41(6): 50-52.
[12]	靳军，种西虎，李广伟. 空气预热器排烟温度偏差分析[J]. 华电技术, 2019, 41(6): 53-56.
[13]	马亮. 基于主汽压动态特性的机组协调预测控制研究[J]. 华电技术, 2019, 41(6): 57-60.
[14]	杨亚龙，李春庆，王永，赵颖. 沉管过河施工中供热管道的安全性验算分析[J]. 华电技术, 2019, 41(6): 61-63.
[15]	邱冬，高彦生，陈向阳. LM系列航改型燃气轮机作为黑启动电源的探讨[J]. 华电技术, 2019, 41(6): 64-66.