华电技术 ›› 2021, Vol. 43 ›› Issue (12): 17-22.doi: 10.3969/j.issn.1674-1951.2021.12.003

• 节能与环保 • 上一篇    下一篇

PVDF中空纤维膜静态浇注封装胶的选用研究

王献德(), 赵晓丹(), 张博丰(), 刘斌*(), 张梦灵(), 寻红敏(), 王建华()   

  1. 华电水务装备(天津)有限公司,天津 301700
  • 收稿日期:2021-07-15 修回日期:2021-09-30 出版日期:2021-12-25 发布日期:2021-12-10
  • 通讯作者: 刘斌
  • 作者简介:王献德(1982—),男,广西平南人,工程师,从事中空纤维超滤膜生产技术开发工作(E‑mail: wangxd@chec.com.cn)。
    赵晓丹(1993—),女,黑龙江五大连池人,助理工程师,从事中空纤维膜超滤膜技术研发工作(E‑mail: zhaoxiaodan@chec.com.cn)。
    张博丰(1981—),男,河北张家口人,高级工程师,从事膜技术与水处理工程工作(E‑mail: zhangbofeng08@163.com)。
    张梦灵(1980—),男,重庆北碚人,工程师,从事给排水工程工艺设计及方案研究工作(E‑mail: 19936702@qq.com)。
    寻红敏(1977年—),男,山东金乡人,工程师,从事超滤膜产品制造及应用方面的工作(E‑mail: xunhm@chec.com.cn)。
    王建华(1982—),男,湖北嘉鱼人,高级工程师,从事水处理技术研发及管理工作(E‑mail: wangjh@chec.com.cn)。
  • 基金资助:
    中国华电科工科技项目(CHECKJ20-01-49)

Study on the selection of sealants statically casted in PVDF hollow fiber membranes

WANG Xiande(), ZHAO Xiaodan(), ZHANG Bofeng(), LIU Bin*(), ZHANG Mengling(), XUN Hongmin(), WANG Jianhua()   

  1. Huadian Water Equipment (Tianjin) Company Limited,Tianjin 301700,China
  • Received:2021-07-15 Revised:2021-09-30 Online:2021-12-25 Published:2021-12-10
  • Contact: LIU Bin

摘要:

研究用于静态浇注聚偏氟乙烯(PVDF)中空纤维膜组件的环氧树脂胶选取方法,对环氧树脂胶进行小试筛选,根据胶的黏度、胶混合时的发热温度、胶固化后的硬度、操作时间等测试结果,初步确定可用于放大做试验的样本。在小试基础上,测试环氧树脂胶在实际组件静态浇注中流入组件内的时间、胶放大后的温度等性能,最终得到可进行放大生产的胶样配方及浇注条件,并测试胶样的耐温性、耐酸碱性、耐氧化性等性能。试验结果表明,环氧树脂胶GRN-B可以满足放大生产需求的条件,并且性能可以满足实际使用要求。

关键词: 静态浇注, 环氧树脂胶, PVDF, 中空纤维, 膜分离技术

Abstract:

The selection approach of epoxy resin adhesives statically casted into PVDF hollow fiber membrane modules is studied.Based on small-scale screening of epoxy resin adhesives,the adhesive sample suitable for scale-up tests is preliminarily elected according to the sample viscosity,heating temperature during mixing,hardness after curing,operation time,etc.In the small-scale test,the time of epoxy resin casting into the membrane module,the temperature of resin after the scale-up test and other properties are tested. Finally,the formula and casting conditions of the epoxy resin are obtained and its resistances to high-temperature,acid,alkali and oxidation are tested.The test results show that the epoxy resin GRN-B can meet the requirements of scale-up production and the actual applications.

Key words: static casting, epoxy resin, PVDF, hollow fiber, membrane separation technique

中图分类号: