燃气-蒸汽联合循环余热锅炉吹管工艺及优化

摘要/Abstract

摘要：

为提高余热锅炉吹管效率、增加吹管工作安全性，提出并实践了一种三阶段蓄能降压法吹管工艺，该工艺对锅炉高中压系统进行联合吹扫、低压系统单独吹扫，保证了管路吹扫效果，提高了吹管效率；通过降低燃气轮机排气温度，优化余热锅炉升温速率，解决了点火初期管道水击问题；正式吹管前采用迅速提高排烟温度的措施来提高蒸汽参数，减少了整个吹管过程的燃料和工时。打靶验收结果表明，锅炉蒸汽系统实际吹扫质量优良，吹管过程安全高效，相关经验可供后续同类机组参考。

关键词:

">">燃气-蒸汽联合循环, 余热锅炉, 降压法, 蒸汽吹管, 优化实践

Abstract:

In order to improve the efficiency of pipe blowing of heat recovery steam generator and enhance the safety of pipe blowing, a threestage energystorage and depressurization technique is put forward and practiced. The technique can be used to blow the high pressure system associated with medium pressure system, and separated from low pressure system, which ensures the effect of the pipe blowing, and improves the efficiency of the heat recovery steam generator. By reducing the exhaust temperature of the gas turbine, heating rate of heat recovery steam generator is optimized to solve the problem of water hammer in pipes at the initial stage of ignition. Increasing the temperature of exhaust smoke before the formal pipe blowing can improve the steam parameters, and decrease the fuel consumption and time of blowing process. The results of targeted acceptance show that the pipe blowing works well in the steam system of boilers, and the process of pipe blowing is safe and efficient. Relevant experience can be used as reference for subsequent similar units.

Key words:

gassteam combined cycle, waste heat boiler, depressurization technique, steam pipe blowing, optimization practice

王林，王红雨，张亚夫，高景辉，孟颖琪. 燃气-蒸汽联合循环余热锅炉吹管工艺及优化[J]. 华电技术, 2018, 40(6): 73-76.

WANG Lin，WANG Hongyu， ZHANG Yafu， GAO Jinghui， MENG Yingqi.

Process and optimization of pipe blowing of heat recovery steam generator in gassteam combined cycle unit

[J]. Huadian Technology, 2018, 40(6): 73-76.

[1]	王志永，许贺，朱慧敏，葛俊沛，许静. 燃气-蒸汽联合循环机组余热锅炉热效率计算模型对比分析[J]. 华电技术, 2020, 42(6): 47-51.
[2]	张俊伟. NG-M701F-R型余热锅炉高压过热器爆管原因分析及解决办法[J]. 华电技术, 2019, 41(7): 46-49.
[3]	蔡雨晴1，杨平1，沈丛奇2，康英伟1，归一数2，徐春梅1. 单相受热管集总参数模型优化及现代控制工程应用[J]. 华电技术, 2019, 41(6): 1-5.
[4]	万立明1，梅振锋2，李德波3，苏朋1，邱家煜1. 中速磨煤机入口紧凑型圆形一次风道流场均流技术研究[J]. 华电技术, 2019, 41(6): 6-12.
[5]	胡美玲1，赵雪瑞2，赵耀丽2. 基于以太网的水电站卷扬式启闭机控制系统的设计[J]. 华电技术, 2019, 41(6): 13-16.
[6]	梁鹏威，康振全，黄浩然，马莉莉，刘洪星，朱朝磊. 基于ANSYS的齿轮模态特性研究[J]. 华电技术, 2019, 41(6): 17-22.
[7]	张巍1a，周国鹏1b，汪洋1a，倪浩1a，钟著辉2. 一起220kV主变压器保护装置发TV异常告警的原因分析[J]. 华电技术, 2019, 41(6): 23-26.
[8]	牛腾赟. 某电厂发电设备可靠性建模及状态预测[J]. 华电技术, 2019, 41(6): 27-32.
[9]	谢坤1,2，赵谦1,2，程成1,2，李帅1,2，蔡亮亮1,2. 具有异常分析功能的通用型数字量输入式合并单元[J]. 华电技术, 2019, 41(6): 33-37.
[10]	苏攀，沈阳，于鹏峰，韩静. 正平衡供电煤耗升高原因分析及煤耗修正计算[J]. 华电技术, 2019, 41(6): 38-41.
[11]	王晓华，谈志林，宫建，李连军. 燃煤电厂氟塑料换热系统的技术经济分析[J]. 华电技术, 2019, 41(6): 42-45.
[12]	徐克涛，何永兵，裴煜坤，张杨. 某燃煤电厂SCR脱硝装置堵塞问题分析及改进[J]. 华电技术, 2019, 41(6): 46-49.
[13]	叶罗，吴俊东，陈显. 低温省煤器系统运行实践分析[J]. 华电技术, 2019, 41(6): 50-52.
[14]	靳军，种西虎，李广伟. 空气预热器排烟温度偏差分析[J]. 华电技术, 2019, 41(6): 53-56.
[15]	马亮. 基于主汽压动态特性的机组协调预测控制研究[J]. 华电技术, 2019, 41(6): 57-60.