华电技术 ›› 2010, Vol. 32 ›› Issue (1): 18-21.
• 研究与开发 • 上一篇 下一篇
刘念晶,陈艳军,徐爱东,张丹丹
收稿日期:
修回日期:
出版日期:
LIU Nianjing, CHEN Yanjun, XU Aidong, ZHANG Dandan
Received:
Revised:
Published:
摘要: 通过对印度JHARSUGUDA IPP 4×600MW机组热控专业防火封堵实例的论述,对电缆桥架、电缆竖井及热控盘柜防火封堵的设计思路进行了分析,供热控专业防火封堵设计时参考。
关键词: 防火封堵, 电缆桥架, 电缆竖井, 热控盘柜, 热控
Abstract: A practical example of fire prevention plugging for instrument and control system in JHARSUGUDA IPP 4×600MW units of India was discoursed, and its design thought of fire prevention plugging for the cable tray, the cable shaft and the I&C panel was analyzed; and the result can be used as reference for design of I&C fire prevention plugging.
Key words: fire prevention plugging, cable tray, cable shaft, instrument and control panel, instrument and control (I&C)
刘念晶;陈艳军;徐爱东;张丹丹. 热控防火封堵的设计及研究[J]. 华电技术, 2010, 32(1): 18-21.
LIU Nianjing;CHEN Yanjun;XU Aidong;ZHANG Dandan. Design and research of fire prevention plugging in instrument and control system[J]. Huadian Technology, 2010, 32(1): 18-21.
/ 推荐
导出引用管理器 EndNote|Ris|BibTeX
链接本文: https://www.hdpower.net/CN/
https://www.hdpower.net/CN/Y2010/V32/I1/18