高压加热器泄漏原因分析及对策

华电技术 ›› 2010, Vol. 32 ›› Issue (6): 47-49.

高压加热器泄漏原因分析及对策

陈涛，魏胜娈

四川华电攀枝花三维发电有限责任公司，四川攀枝花617065

收稿日期:1900-01-01 修回日期:1900-01-01 出版日期:2010-06-25 发布日期:2010-06-25

The reason of leakage of high pressure heater and countermeasures

CHEN Tao, WEI Shengluan

Sichuan Huadian Panzhihua Sanwei Power Generation Corporation Limited, Panzhihua 617065, China

Received:1900-01-01 Revised:1900-01-01 Online:2010-06-25 Published:2010-06-25

摘要/Abstract

摘要： 四川华电攀枝花三维发电有限责任公司2×150MW汽轮机组2005年投入商业运行以来， #2高压加热器在运行中频繁泄漏，截至2007年8月， #11、#12机组堵管率分别达8%和9%，严重影响机组的安全性和经济性。根据 #2高压加热器制造、安装、调试、实际运行情况，对 #2高压加热器泄漏的原因进行了分析，提出了相应的解决措施。通过有效的治理，使 #11、#12机组高压加热器的投入率由先前的79.62%和81.98%提高到现在的99.32%和98.43%，提高了机组运行的安全性和经济性。

关键词: 150MW汽轮机组, 高压加热器, 泄漏, 投入率

Abstract: The two 150MW steam turbine units of Sichuan Huadian Panzhihua Sanwei Power Generation Corporation Limited were put in operation at 2005. Since then, the leakage fault of high pressure heater No.2 often occurred in operation. Up to the August 2007, the blind tube rate of No.11 and No.12 units reached 8% and 9% respectively, and this influenced on the safety and economical efficiency of the units badly. According to the fabrication, erection, debugging and actual operation of No.2 high pressure heater, the reason of leakage of No.2 high pressure heater was analyzed, and relevant solving measures were proposed. After effective rectification, the operation rate of No.11 and No.12 high pressure heaters were raised from previous 79.62% and 81.98% to present 99.32% and 98.43%, the safety and economical efficiency of the unit operation were raised.

Key words: 150MW steam turbine unit, high pressure heater, leakage, operation rate

陈涛;魏胜娈. 高压加热器泄漏原因分析及对策[J]. 华电技术, 2010, 32(6): 47-49.

CHEN Tao;WEI Shengluan. The reason of leakage of high pressure heater and countermeasures[J]. Huadian Technology, 2010, 32(6): 47-49.

[1]	荆立坤, 唐宜强, 潘凤萍, 吴振龙. 基于鲁棒约束的PI控制器参数多目标优化及应用[J]. 华电技术, 2021, 43(5): 1-8.
[2]	王志永，许贺，朱慧敏，葛俊沛，许静. 燃气-蒸汽联合循环机组余热锅炉热效率计算模型对比分析[J]. 华电技术, 2020, 42(6): 47-51.
[3]	徐江，赵志发，李军. 1000MW二次再热机组给水温度优化实施[J]. 华电技术, 2020, 42(1): 78-80.
[4]	张天海1，于国强1，殳建军1，汤可怡1，竺永久2. 超超临界二次再热机组高压加热器系统控制策略研究[J]. 华电技术, 2019, 41(3): 35-39.
[5]	张云斌，柴海超，王欣荷. 提高火力发电厂自动电压控制系统投入率的措施[J]. 华电技术, 2019, 41(1): 55-58.
[6]	俞忠勇. 火电厂LGGH系统运行维护简析[J]. 华电技术, 2018, 40(8): 39-41.
[7]	朱雪平. MGGH泄漏原因分析及对策[J]. 华电技术, 2018, 40(8): 47-49.
[8]	袁捷，钱卫武，施晓炜，韩竞一. 凝汽器真空系统泄漏的原因分析及处理[J]. 华电技术, 2018, 40(8): 59-60.
[9]	赵娜. 杨柳青热电锅炉炉管泄漏监测系统应用分析[J]. 华电技术, 2018, 40(7): 25-28.
[10]	何忠财. 燃油三用阀泄漏原因分析与研究[J]. 华电技术, 2018, 40(6): 49-50.
[11]	傅强1，柳耀文1，周添2，刘海波1，赵加宁2，周志刚2，王睿鑫2. 供热系统泄漏状况评价[J]. 华电技术, 2018, 40(12): 4-7.
[12]	陆定康，胥建国，钱松锋. 燃机电站余热锅炉受热面泄漏原因及预防措施[J]. 华电技术, 2018, 40(11): 27-30.
[13]	王奉平，李健，赵爱民. 锅炉低温再热器内壁腐蚀原因分析及预防措施[J]. 华电技术, 2017, 39(8): 32-35.
[14]	左俊杰，吕新锋. 火电厂酸碱泄漏防治措施[J]. 华电技术, 2017, 39(6): 70-71.
[15]	魏泉泉，牛玉静. 某电厂高温再热器出口TP347H材质管段泄漏原因分析[J]. 华电技术, 2017, 39(5): 52-54.