汽轮机油挡正压密封设计

华电技术 ›› 2008, Vol. 30 ›› Issue (11): 38-42.

汽轮机油挡正压密封设计

陈声¹，韩兴全²

1.新疆华电吐鲁番发电有限公司,新疆吐鲁番 838100; 2.新疆天山电力玛纳斯发电分公司,新疆玛纳斯 832200

收稿日期:1900-01-01 修回日期:1900-01-01 出版日期:2008-11-25 发布日期:2008-11-25

Positive pressure sealing design of oil baffle in turbine

CHEN Sheng¹，HAN Xingquan²

1. Xinjiang Huadian Turpan Power Generation Corporation Limited, Turpan 838100, China；2. Manas Generation Branch of Xinjiang Tianshan Electricity, Manas 832200, China

Received:1900-01-01 Revised:1900-01-01 Online:2008-11-25 Published:2008-11-25

摘要/Abstract

摘要： 为了防止汽轮机润滑油中带水以及油挡漏油，可向汽轮机各轴瓦油挡空腔室内输送干净压缩空气，使腔室内的压缩空气向大气和油室两侧流动，密封住了润滑油向外流动和蒸汽向油室流动。通过详细计算各油挡所需压缩空气量、各瓦油挡的流体阻力以及回气管道的阻力，得出了各瓦油挡入口、出口调整阀的压力值。杜绝了汽轮机轴瓦油挡漏油和油室中进水，保证了汽轮机长周期安全运行，同时也节约了大量人力物力。

关键词: 油挡, 压力, 压降, 管道阻力

Abstract: To prevent water to be entrapped in the lubrication oil and the oil to leak out from the oil baffle of steam turbine, the clean compressed air can be injected into oil baffle cavity of each bearing shell of the turbine, which flow in both direction of outer space and oil housing, preventing the oil to leak out and the steam to flow into the oil housing. The pressures of the compressed air of the adjustment valves at the inlet and outlet of each bearing shell were determined by detailed calculation of the compressed air flow needed for each bearing shell, the fluid resistance of each bearing shell and the resistance of backair pipe. The oil leakage from the oil baffles and entrapped water into the oil housings of the beating shells were eliminated, the safety operation of turbine in long period was ensured, and a lot of labor forces and material resources were saved due to adopting above mentioned measures.

Key words: oil baffle, pressure, pressure drop, pipe resistance

陈声;韩兴全. 汽轮机油挡正压密封设计[J]. 华电技术, 2008, 30(11): 38-42.

CHEN Sheng;HAN Xingquan. Positive pressure sealing design of oil baffle in turbine[J]. Huadian Technology, 2008, 30(11): 38-42.

[1]	彭丽, 石战胜, 董方, 敬旭业, 马治安. 基于 CFD-DPM 的旋风分离器性能参数影响研究[J]. 华电技术, 2020, 42(12): 43-48.
[2]	刘志敏1，2，丁阳1，徐婷婷1，白云山1. 燃气轮机燃烧压力脉动与测量关键技术研究 [J]. 华电技术, 2019, 41(9): 1-5.
[3]	陈啸，徐威，刘利，陈鑫. 某600MW机组汽轮机异常振动的分析及处理[J]. 华电技术, 2019, 41(7): 64-66.
[4]	宋馨. 汽轮机轴封蒸汽温度波动原因分析与解决方案[J]. 华电技术, 2019, 41(2): 46-48.
[5]	王亮茗. 9FA燃机透平排气分散度高的原因分析及预防对策[J]. 华电技术, 2019, 41(1): 50-54.
[6]	于淑慧. 高背压供热改造中给水泵汽轮机控制方式研究[J]. 华电技术, 2019, 41(1): 64-66.
[7]	莫布林. 锅炉炉膛压力保护系统改造[J]. 华电技术, 2018, 40(7): 29-31.
[8]	柯昭，郝翰，王钢. 超超临界机组PCV阀控制系统优化策略[J]. 华电技术, 2018, 40(6): 56-57.
[9]	吴鑫杰. null[J]. 华电技术, 2018, 40(4): 54-55.
[10]	黄友昌. 火电工程建设中质监站锅炉压力容器的安全监督[J]. 华电技术, 2018, 40(11): 40-41.
[11]	朱达. 变压器压力释放阀在线试验初探[J]. 华电技术, 2018, 40(1): 42-43.
[12]	杨大锚. 变PID参数法在电厂自动发电控制中的应用[J]. 华电技术, 2017, 39(8): 6-9.
[13]	王予川1，杨智峰2. 热网加热器的安全运行措施[J]. 华电技术, 2017, 39(12): 44-45.
[14]	万月英，黄佩兵，胡丽娟. 压力钢管组合钢衬垫单面对接焊工艺[J]. 华电技术, 2016, 38(9): 55-55.
[15]	杨艳景1，张莉莉2，凌端强3，常立勇1. 菲律宾Therma South 热电厂输煤系统电动机启动压降分析[J]. 华电技术, 2016, 38(6): 1-5.