华电技术 ›› 2009, Vol. 31 ›› Issue (11): 18-19.

• 专题综述 • 上一篇    下一篇

板式换热器换热板片微变形特性浅析

俞立凡,吴胜法   

  1. 杭州华电半山发电有限公司,浙江杭州 310015
  • 收稿日期:1900-01-01 修回日期:1900-01-01 出版日期:2009-11-25 发布日期:2009-11-25

Discussion of heat exchange plate microdistortion characteristics of plate exchanger

YU Lifan, WU Shengfa   

  1. Hangzhou Huadian Banshan Power Generation Corporation Limited, Hangzhou 310015, China
  • Received:1900-01-01 Revised:1900-01-01 Online:2009-11-25 Published:2009-11-25

摘要: 介绍了板式换热器的工作原理;分析了其主要部件换热板片的微变形能力(该特性容易被忽视),即在换热器某侧的压力变化时,会影响板片形状,造成换热器内部两侧的容积发生变化,从而引起另一侧压力波动;讨论了该特性在实际应用中存在的案例,给出了处理对策。

关键词: 板式换热器, 换热板片, 微变形特性, 容积变化, 处理对策

Abstract: The operating principle of plate exchanger was introduced. The microdistortion characteristic of the heat exchange plate was analyzed which was ignored easily. The microdistortion means that the pressure variation on one side of exchanger will influence the shape of the heat exchange plate, and which causes the volume inside the exchanger between the both side to vary and the pressure on another side of the exchanger to fluctuate. The practical example of microdistortion was discussed, and relevant handling measure was given.

Key words: plate exchanger, heat exchange plate, micro-distortion characteristic, volume change, handling measure