压力钢管合拢焊缝接头形式试验研究

华电技术 ›› 2009, Vol. 31 ›› Issue (6): 4-7.

压力钢管合拢焊缝接头形式试验研究

王富林

国电郑州机械设计研究所，河南郑州 450052

收稿日期:1900-01-01 修回日期:1900-01-01 出版日期:2009-06-25 发布日期:2009-06-25

Experiment study on closured weld joint type of pressure pipes

WANG Fulin

State Power Zhengzhou Machinery Design Institute, Zhengzhou 450052, China

Received:1900-01-01 Revised:1900-01-01 Online:2009-06-25 Published:2009-06-25

摘要/Abstract

摘要： 通过模拟合拢焊缝现场施焊的实际工况条件，了解和掌握合拢焊缝采用对接接头或搭接接头形式时的拘束应力和焊接残余应力状况，为三峡左岸电站#1～#6机压力钢管合拢焊缝选择合适的接头形式提供依据。

关键词: 压力钢管, 合拢焊缝, 接头形式, 拘束应力, 焊接残余应力

Abstract: By simulating the real condition of field welding of closured weld joint, the constraint stress and welding residual stress status in adopting butt joint and overlap joint were understood and grasped, so providing foundations of selecting feat closured weld joint type for pressure pipes′ welding of No.1～No.6 unit at Three Gorges Left Bank Power Station .

Key words: pressure pipe, closured weld joint, joint type, constraint stress, welding residual stress

王富林. 压力钢管合拢焊缝接头形式试验研究[J]. 华电技术, 2009, 31(6): 4-7.

WANG Fulin. Experiment study on closured weld joint type of pressure pipes[J]. Huadian Technology, 2009, 31(6): 4-7.

[1]	万月英，黄佩兵，胡丽娟. 压力钢管组合钢衬垫单面对接焊工艺[J]. 华电技术, 2016, 38(9): 55-55.
[2]	杨春国，陈博. 水电站洞内高竖井压力钢管安装安全管理简析[J]. 华电技术, 2016, 38(6): 34-37.
[3]	黄纯忠. 水电机组流道压力钢管等锈蚀问题分析[J]. 华电技术, 2009, 31(1): 11-13.