华电技术 ›› 2010, Vol. 32 ›› Issue (1): 8-9.

• 专题综述 • 上一篇    下一篇

凝结水精处理系统改造

范晔晖   

  1. 中国华电工程(集团)有限公司,北京 100035
  • 收稿日期:1900-01-01 修回日期:1900-01-01 出版日期:2010-01-25 发布日期:2010-01-25

Reformation of condensate precision processing system

FAN Yehui   

  1. China Huadian Engineering Corporation Limited, Beijing 100035, China
  • Received:1900-01-01 Revised:1900-01-01 Online:2010-01-25 Published:2010-01-25

摘要: 湖南大唐石门电厂凝结水精处理系统由于树脂再生分离的效果不佳,影响了凝结水精处理系统的正常使用。在尽量利用原有设备的基础上,对凝结水精处理系统进行了改造。在系统改造过程中,再生系统采用了分离效果较好的高塔分离法。改造后,凝结水精处理系统运行稳定,机组的经济性能有了很大的提高。

关键词: 凝结水, 精处理, 体外再生装置, 树脂再生分离, 高塔分离法, 系统改造

Abstract: In Hunan Datang Shimen Power Plant, the condensate precision processing system can not operate normally due to its bad effect of resin regeneration and separation. Based on utilizing original equipments as much as possible, the condensate precision processing system had been reformed, and in the reformation, the high tower separation method with better effect had been adopted for regeneration system. After the reformation, the condensate precision processing system operates more steadily and economically.

Key words: condensate, precision processing, outside regeneration, resin regeneration and separation, high tower separation method, system reformation