入厂煤与入炉煤热值差大的原因分析

华电技术 ›› 2010, Vol. 32 ›› Issue (8): 37-38.

入厂煤与入炉煤热值差大的原因分析

李长志

中国华电集团富拉尔基发电总厂，黑龙江齐哈尔161041

收稿日期:1900-01-01 修回日期:1900-01-01 出版日期:2010-08-25 发布日期:2010-08-25

Reason analysis of caloric value major difference of asreceived coal and asfired coal

LI Changzhi

China Huadian Fulaerji General Power Plant, Qiqihar 161041, China

Received:1900-01-01 Revised:1900-01-01 Online:2010-08-25 Published:2010-08-25

摘要/Abstract

摘要： 对中国华电集团富拉尔基发电总厂2009年第1季度入厂煤及入炉煤热值差进行了对比, 分析了引起入厂煤及入炉煤热值差大的原因，找出了入厂煤及入炉煤水分是影响热值差的主要因素，提出了相应措施，使入厂煤及入炉煤的热值差控制在合理的范围内。

关键词: 入厂煤, 入炉煤, 收到基低位发热量, 空干基高位发热量, 热值差, 全水分

Abstract: The caloric value of asreceived coal and that of asfired coal of China Huadian Fulaerji General Power Plant in the first quarter 2009 were compared, and the reasons caused the difference of caloric values of asreceived coal and asfired coal were analyzed. It was found that the main factor influencing on the difference of caloric values is coal moisture. The relevant measures were proposed, and the difference of caloric values of asreceived coal and asfired coal had been controlled in rational range. 

Key words: as-received coal, as-fired coal, net caloric value of as-received basis, gross caloric value of air dried basis, difference of caloric value, total moisture

李长志. 入厂煤与入炉煤热值差大的原因分析[J]. 华电技术, 2010, 32(8): 37-38.

LI Changzhi. Reason analysis of caloric value major difference of asreceived coal and asfired coal[J]. Huadian Technology, 2010, 32(8): 37-38.

[1]	苏攀，沈阳，于鹏峰，韩静. 正平衡供电煤耗升高原因分析及煤耗修正计算[J]. 华电技术, 2019, 41(6): 38-41.
[2]	邓有纬1，盛玉林2，严凡华1. 输煤程控系统PLC与入炉煤皮带秤之间通信的实现[J]. 华电技术, 2019, 41(6): 67-71.
[3]	许伟强，刘翔. 配置双进双出磨煤机的超临界机组入炉煤量计算方法及应用[J]. 华电技术, 2018, 40(7): 10-13.
[4]	陈伟. 入炉煤掺配比例精益化管理探索与实践[J]. 华电技术, 2017, 39(2): 44-47.
[5]	孙永. 火车入厂煤采制样装置机械结构优化设计[J]. 华电技术, 2015, 37(12): 10-14.
[6]	李美琳，龙卫. 入炉煤中部机械采样装置的优化设计布置方案[J]. 华电技术, 2014, 36(9): 11-12.
[7]	曹德平. 基于VB的入炉煤数据管理系统[J]. 华电技术, 2012, 34(3): 45-48.
[8]	房永海;王效柱;王志强. 335MW机组燃用煤掺配管理[J]. 华电技术, 2011, 33(6): 8-10.
[9]	赵亚山. 入厂煤采样及在线检测一体化装置的应用[J]. 华电技术, 2011, 33(12): 56-57.
[10]	贾源. 入厂煤与入炉煤热值差大的原因及对策[J]. 华电技术, 2010, 32(S1): 1-3.
[11]	石海峰;崔连成. 循环流化床锅炉燃烧的优化调整[J]. 华电技术, 2008, 30(12): 45-47.