入厂煤与入炉煤热值差大的原因及对策

华电技术 ›› 2010, Vol. 32 ›› Issue (S1): 1-3.

• 专题综述 • 下一篇

入厂煤与入炉煤热值差大的原因及对策

贾源

云南华电昆明发电有限公司，云南安宁650308

收稿日期:1900-01-01 修回日期:1900-01-01 出版日期:2010-07-26 发布日期:2010-07-26

Reasons and countermeasures of larger difference of calorific value between asreceived coal and asfired coal

JIA Yuan

Yunnan Huadian Kunming Power Generation Corporation Limited, Anning 650308, China

Received:1900-01-01 Revised:1900-01-01 Online:2010-07-26 Published:2010-07-26

摘要/Abstract

摘要： 入厂煤和入炉煤热值差是各火电厂十分关注的问题, 控制好入厂煤与入炉煤热值差对降低发电成本、促进电厂安全稳定运行有着积极的意义。从采样环节详细分析了入厂煤与入炉煤热值差大的原因,提出了相应对策，热值差指标得到较大改善。

关键词: 入厂煤, 入炉煤, 水分差, 热值差, 采样, 性能试验

Abstract: The thermal power plants pay high attention to the difference of the calorific value between asreceived coal and asfired coal. The proper control for the difference of the calorific value is of active significance to reduce the generation cost and promote the safe and stable operation of the power plant. Starting from the sampling, the reasons of the larger difference of the calorific value between asreceived coal and asfired coal were analyzed. The relevant countermeasures were proposed, and the index of the difference of the calorific value was improved considerably.

Key words: as-received coal, as-fired coal, difference of moisture content, difference of Calorific value, sampling, performance test

贾源. 入厂煤与入炉煤热值差大的原因及对策[J]. 华电技术, 2010, 32(S1): 1-3.

JIA Yuan. Reasons and countermeasures of larger difference of calorific value between asreceived coal and asfired coal[J]. Huadian Technology, 2010, 32(S1): 1-3.

[1]	吴路明，薛明军，陈琦，王永旭，唐治国，陈宏岩. 一起电子互感器异常引发的复杂发展性故障分析及改进[J]. 华电技术, 2020, 42(6): 10-15.
[2]	贡文明1，李炜2，李明2. 燃气-蒸汽联合循环机组在线性能试验研究[J]. 华电技术, 2019, 41(9): 25-28.
[3]	苏攀，沈阳，于鹏峰，韩静. 正平衡供电煤耗升高原因分析及煤耗修正计算[J]. 华电技术, 2019, 41(6): 38-41.
[4]	邓有纬1，盛玉林2，严凡华1. 输煤程控系统PLC与入炉煤皮带秤之间通信的实现[J]. 华电技术, 2019, 41(6): 67-71.
[5]	朱重阳. 基于MK64平台的配网终端多回路录波方案[J]. 华电技术, 2019, 41(5): 65-68.
[6]	许伟强，刘翔. 配置双进双出磨煤机的超临界机组入炉煤量计算方法及应用[J]. 华电技术, 2018, 40(7): 10-13.
[7]	张保善，张群玲，程克杰，杨静，王梦琦，赵颖. 就地化保护测控装置滤波电路分析及测试[J]. 华电技术, 2018, 40(11): 8-11.
[8]	蔡雨1，赵丽娟2，丁勇能2，李蔚1. S109FA燃气-蒸汽联合循环机组D10型汽轮机性能诊断分析[J]. 华电技术, 2017, 39(6): 28-31.
[9]	景卫哲，刘洋，田宇娣. 计及预测误差的冷热电联供系统成本计算方法[J]. 华电技术, 2017, 39(5): 1-6.
[10]	张延林，王鹏，韩英杰，樊予胜，刘政. 变频电动机差动保护的研究与应用[J]. 华电技术, 2017, 39(4): 8-10.
[11]	孙蓓俊，徐丽青，陈新之. 交流采样回路接触阻抗原理及仿真分析[J]. 华电技术, 2017, 39(3): 9-11.
[12]	陈伟. 入炉煤掺配比例精益化管理探索与实践[J]. 华电技术, 2017, 39(2): 44-47.
[13]	张湛1，汪洋堃2,张峰2. 一种递推改进的DFT同步相量测量方法的特性分析[J]. 华电技术, 2016, 38(9): 13-19.
[14]	周仁米，吴恒刚，董益华，朱宝. 超超临界二次再热机组汽轮机性能试验及经济性对比[J]. 华电技术, 2016, 38(6): 28-30.
[15]	杨青松，李玉平，张玮，康丰，李进. 高压变频系统电动机保护方案研究[J]. 华电技术, 2016, 38(12): 6-8.

入厂煤与入炉煤热值差大的原因及对策

Reasons and countermeasures of larger difference of calorific value between asreceived coal and asfired coal

可视化

被引次数

摘要/Abstract

引用本文

使用本文

参考文献

相关文章 15

编辑推荐

Metrics

本文评价