锅炉受压筒体强度采用ASME规范与国内标准计算方法的对比

华电技术 ›› 2011, Vol. 33 ›› Issue (10): 29-31.

锅炉受压筒体强度采用ASME规范与国内标准计算方法的对比

陈志刚，张旭，毛富杰，王方

天津市特种设备监督检验技术研究院，天津300192

收稿日期:1900-01-01 修回日期:1900-01-01 出版日期:2011-10-25 发布日期:2011-10-25

Comparison of calculation of boiler pressure cylinder strength according to ASME codes with that according to domestic standard

CHEN Zhigang, ZHANG Xu, MAO Fujie, WANG Fang

Tianjin Special Equipment Inspection Institute, Tianjin 300192

Received:1900-01-01 Revised:1900-01-01 Online:2011-10-25 Published:2011-10-25

摘要/Abstract

摘要： 强度计算是蒸汽锅炉设计的重要组成部分，对比分析了ASME规范第Ⅰ卷与国内锅炉强度计算标准GB/T 9222—2008《水管锅炉受压元件强度计算》关于锅炉筒体强度计算的异同，可为工程技术人员提供参考。

关键词: 蒸汽锅炉, 强度计算, ASME规范, 国内标准, 对比分析

Abstract: The strength calculation is important component of steam boikler design. The similarities and differences of the ASME codes volume I and the domestic boiler strength calculation standard, GB/T 9222—2008 “Strength calculation of pressure parts for watertube boiler”, on strength calculation of boiler body were compared and analyzed, which can be used as reference for engineers and technicians.

Key words: steam boiler, strength calculation, ASME (American Society of Mechanical Engineers) codes, domestic standard, comparative analysis

陈志刚;张旭;毛富杰;王方. 锅炉受压筒体强度采用ASME规范与国内标准计算方法的对比[J]. 华电技术, 2011, 33(10): 29-31.

CHEN Zhigang;ZHANG Xu;MAO Fujie;WANG Fang. Comparison of calculation of boiler pressure cylinder strength according to ASME codes with that according to domestic standard[J]. Huadian Technology, 2011, 33(10): 29-31.

[1]	张辉. 石子煤负压气力输送系统在清水川电厂二期工程中的应用[J]. 华电技术, 2014, 36(7): 57-59.
[2]	郑孝卿. 重型燃气轮机检修模式分析[J]. 华电技术, 2014, 36(11): 58-59.
[3]	刘永建. 双抽汽调节式汽轮机的供热成本对比分析[J]. 华电技术, 2011, 33(7): 7-9.
[4]	马千里. 火电厂脱硝系统氨气制备方案比较[J]. 华电技术, 2011, 33(12): 58-59.
[5]	李飚;代静轶. 300MW机组减温水量调整分析[J]. 华电技术, 2010, 32(S1): 29-30.
[6]	刘玉敬;尹民权. 电站锅炉节约用油分析[J]. 华电技术, 2009, 31(5): 71-75.