华电技术 ›› 2011, Vol. 33 ›› Issue (2): 20-21.

• 研究与开发 • 上一篇    下一篇

40.5kV开关柜穿墙套管电场分析与优化设计

王文峰,张清杰,蒋立齐   

  1. 河南电力博大工程设计有限公司,河南郑州450007
  • 收稿日期:1900-01-01 修回日期:1900-01-01 出版日期:2011-02-25 发布日期:2011-02-25

Analysis on electric field of wall bushing for 40.5kV switch cabinet and optimized design

WANG Wenfeng, ZHANG Qingjie, JIANG Liqi   

  1. Henan Electric Power Boda Engineering Design Company Limited, Zhengzhou 450007, China
  • Received:1900-01-01 Revised:1900-01-01 Online:2011-02-25 Published:2011-02-25

摘要: 针对开关柜母线穿墙套管出现局部绝缘老化及局部放电的现象,利用有限元分析软件Ansys对该处电场分布进行仿真分析,提出了适量增加绝缘套管内径、矩形母线进行圆角处理2种结构优化方案。仿真结果表明,优化方案有利于改善母线与穿墙套管间空气间隙的电场分布,能够有效减少穿墙套管局部绝缘老化现象的产生。

关键词: 开关柜, 穿墙套管, 绝缘老化, 电场分布

Abstract: Aiming at the aging of partial insulation and partial discharge of wall bushing for switch cabinet bus, using the finite element analysis software Ansys, the partial electric field distribution was simulated and analyzed. The two structure optimization schemes were put forward, one of them is to increase the inner diameter of the insulation bushing properly, and the other is to reform the rectangular section of the bus into round corner shape. The simulation result shows that the optimized schemes can improve the electric field distribution in the air gap between the bus and the wall bushing and decrease the partial insulation aging of the wall bushing effectively.

Key words: switch cabinet, wall bushing, insulation aging, electric field distribution