华电技术 ›› 2011, Vol. 33 ›› Issue (9): 27-30.
• 研究与开发 • 上一篇 下一篇
王康,余雷模,牛越
收稿日期:
修回日期:
出版日期:
发布日期:
WANG Kang, YU Leimo, NIU Yue
Received:
Revised:
Online:
Published:
摘要: 介绍了以AutoCAD 2004为开发基础的软件,在Visual Studio 2003平台上利用Visual C++语言编写ObjectARX程序,完成三维参数化建模。以起重机小车架为实例,开发出了起重机变结构小车架快速设计系统,该系统可提高设计人员的工作效率。
关键词: ObjectARX程序, AutoCAD软件, 小车架, 参数化建模, 结构分析
Abstract: The software AutoCAD2004 was introduced. On the Visual Studio 2003 platform, using the visual C++ language, an ObjectARX program had been written, and a 3dimensional parametric modeling had been accomplished. Taking the trolley frame of crane as example, a fast design system for trolley frame of crane with variable structure had been developed; and the working efficiency of the designers can be improved by using this system.
Key words: ObjectARX program, Software AutoCAD, trolley frame, parametric modeling, structure analysis
王康;余雷模;牛越. 基于ObjectARX的变结构小车架三维参数化建模[J]. 华电技术, 2011, 33(9): 27-30.
WANG Kang;YU Leimo;NIU Yue. Three dimensional parametric modeling for trolley frame with variable structure based on ObjectARX[J]. Huadian Technology, 2011, 33(9): 27-30.
0 / / 推荐
导出引用管理器 EndNote|Ris|BibTeX
链接本文: https://www.hdpower.net/CN/
https://www.hdpower.net/CN/Y2011/V33/I9/27