燃气轮机和压气机联轴器螺栓断裂原因分析

华电技术 ›› 2012, Vol. 34 ›› Issue (S1): 47-49.

燃气轮机和压气机联轴器螺栓断裂原因分析

钱程

上海通华燃气轮机服务有限公司，上海200003

收稿日期:1900-01-01 修回日期:1900-01-01 出版日期:2012-11-10 发布日期:2012-11-10

Analysis on reason of fracture of coupler bolt between gas turbine and gas compressor

QIAN Cheng

Shanghai Tonghua Gas Turbine Service Company Limited, Shanghai 200003, China

Received:1900-01-01 Revised:1900-01-01 Online:2012-11-10 Published:2012-11-10

摘要/Abstract

摘要： 某电厂S109FA燃气轮机运行中出现了事故停机，检查发现燃气轮机和压气机的联轴器螺栓出现断裂。通过分析得出螺栓断裂的原因为：安装或运输过程中在螺栓表面形成了轻微的划痕，镉元素在划痕区域聚集使金属脆化，运行中因振动过大导致裂纹扩展而最终断裂。

关键词: S109FA燃气轮机, 压气机, 联轴器, 螺栓, 振动, 断裂, 原因分析

Abstract: An accidental shutdown occurred in operation of the S109FA gas turbine of a power plant. By inspection, it was found that the coupler bolt between the gas turbine and the gas compressor fractured. According to analysis, the reason of the bolt fracture was determined as below, there was slight scratch on the bolt surface formed in transportation and installation processes, the element Cadmium gathered in the scratch area and caused the metal became brittle; and in operation, the too large vibration caused the crack extended and the bolt fractured at last.

Key words: S109FA gas turbine, gas compressor, coupler, bolt, vibration, fracture, reason analysis

钱程. 燃气轮机和压气机联轴器螺栓断裂原因分析[J]. 华电技术, 2012, 34(S1): 47-49.

QIAN Cheng. Analysis on reason of fracture of coupler bolt between gas turbine and gas compressor[J]. Huadian Technology, 2012, 34(S1): 47-49.

[1]	程学庆,施佳赟. 某核电站主给水前置泵振动超标治理[J]. 华电技术, 2020, 42(5): 83-88.
[2]	陈浩，徐军锋. 600MW超临界机组配汽特性对轴系振动的影响[J]. 华电技术, 2019, 41(9): 29-32.
[3]	毛杨军. LM航改型燃机发电机组联轴器的选型与安装[J]. 华电技术, 2019, 41(8): 15-19.
[4]	陆定康，周伟. 工业水泵振动异常分析和处理[J]. 华电技术, 2019, 41(8): 78-80.
[5]	陈啸，徐威，刘利，陈鑫. 某600MW机组汽轮机异常振动的分析及处理[J]. 华电技术, 2019, 41(7): 64-66.
[6]	吴昌浩，曹景芳. 低速钢球磨煤机减速机齿轮断齿故障诊断及分析[J]. 华电技术, 2019, 41(5): 69-72.
[7]	周兴宏. GE PG9171E重型燃机轴振超限的原因及处理[J]. 华电技术, 2019, 41(5): 76-77.
[8]	冯坤. 1000 MW超超临界机组发电机调试期间振动问题的分析及处理[J]. 华电技术, 2019, 41(12): 41-45.
[9]	徐要伟1，朱晨1，张文科2. 水电站泄洪闸弧形工作闸门原型观测试验[J]. 华电技术, 2019, 41(12): 46-49.
[10]	刘强. 汽轮机安全监视系统设备存在的问题及防范措施[J]. 华电技术, 2018, 40(9): 30-31.
[11]	陈杰，赵卫正. 600MW机组通流改造后振动故障诊断及处理[J]. 华电技术, 2018, 40(9): 40-43.
[12]	王博磊，曹伟，牟法海，昃刚，巩振泉. 热电联产汽轮发电机组振动异常原因分析与处理[J]. 华电技术, 2018, 40(8): 42-43.
[13]	汪小峰1，陈锐2. 某电厂主蒸汽管道振动原因分析及治理[J]. 华电技术, 2018, 40(7): 32-34.
[14]	安宗武1，孟颖琪1，刘超1，李长海1，吴忠胜2. 新型350MW超临界供热机组调试期间故障分析及处理[J]. 华电技术, 2018, 40(7): 50-53.
[15]	孙海元. 某电厂330MW汽轮机冷态启动用时过长原因分析及处理[J]. 华电技术, 2018, 40(7): 54-55.