旋流对冲锅炉火检信号剧烈波动的原因分析及调整措施

华电技术 ›› 2015, Vol. 37 ›› Issue (7): 52-54.

旋流对冲锅炉火检信号剧烈波动的原因分析及调整措施

上海发电设备成套设计研究院，上海〓201100

出版日期:2015-07-25 发布日期:2015-10-09

The reason analysis on drastic fluctuation of flame detecting signals in swirlopposed boiler and its adjustment measures

Shanghai Power Equipment Research Institute, Shanghai 201100, China

Online:2015-07-25 Published:2015-10-09

摘要/Abstract

摘要：

摘要：四川广安发电有限责任公司 #62锅炉在低负荷状态下投运D层燃烧器时炉内火焰检测信号剧烈波动，分析原因为D层燃烧器煤粉着火延迟，导致火焰黑龙区过长，未点燃的煤粉影响邻层燃烧。通过调整一次风温度、煤粉细度及一次风、二次风流量等参数，改善了煤粉的着火条件，缩短了煤粉的着火时间，使煤粉进入炉膛后能够快速点燃。燃烧调整后，该锅炉在低负荷状态下投运D层燃烧器，炉内火焰检测信号波动情况大为改善。

关键词: 关键词：火检波动, 燃烧调整, 煤粉细度, 一次风温度, 旋流对冲锅炉

Abstract:

Abstract:Through analyzing the drastic fluctuation of flame detecting signals in layer D burner for No.62 boiler that is working under low load conditions in Sichuan Guang'an power plant, the reason is considered as the pulverized coal of layer D burner ignition delayed and generated an overlength unburned zone, and consequently influenced the combustion of neighbor layer. Through adjusting the parameters, such as temperature of primary air, fineness of pulverized coal, flow of primary air and secondary air et al., the ignition condition of pulverized coal is improved and the ignition time is shortened，which makes the pulverized coal burnt quickly after entering furnace. After the combustion adjustments, the fluctuation of flame detecting signals becomes normal at low load conditions.

周文台. 旋流对冲锅炉火检信号剧烈波动的原因分析及调整措施[J]. 华电技术, 2015, 37(7): 52-54.

ZHOU Wentai. The reason analysis on drastic fluctuation of flame detecting signals in swirlopposed boiler and its adjustment measures[J]. Huadian Technology, 2015, 37(7): 52-54.

[1]	王云鹏，段小云. 330MW热电联产机组锅炉低氮燃烧器改造和燃烧调整[J]. 华电技术, 2020, 42(6): 35-42.
[2]	丁阳，郝建刚，谢大幸. 9E型燃气轮机DLN1.0燃烧系统数值分析[J]. 华电技术, 2020, 42(5): 31-36.
[3]	徐婷婷，丁阳，张梦可，刘志敏. 燃气轮机燃烧调整国内外研究技术综述[J]. 华电技术, 2018, 40(12): 8-12.
[4]	李茂1，游必超1，后颖黎1，王林2. 35t/h启动锅炉超温分析与技术改造[J]. 华电技术, 2018, 40(12): 13-15.
[5]	冯锦. ZGM-I-Ⅱ-Ⅲ型与MPS-HP-Ⅱ型磨煤机的设备选型[J]. 华电技术, 2016, 38(4): 30-31.
[6]	蒋蓬勃. 钢球磨煤机最佳通风量简化计算方法研究[J]. 华电技术, 2016, 38(3): 21-22.
[7]	陶再素. 火电厂节能及经济运行措施[J]. 华电技术, 2016, 38(10): 66-68.
[8]	孙海元. 超临界锅炉水冷壁高温腐蚀原因分析及改造措施[J]. 华电技术, 2015, 37(7): 29-31.
[9]	陈飞. 660MW前后墙对冲燃烧锅炉结焦原因分析与治理[J]. 华电技术, 2015, 37(4): 62-63.
[10]	吴建良. MPS212中速磨煤机直吹式制粉系统运行特性分析[J]. 华电技术, 2015, 37(3): 61-63.
[11]	傅勇强1，李奎1，陈乃晓1，何劲波1，程强2，姚斌2. 600MW机组燃烧调整试验研究[J]. 华电技术, 2015, 37(2): 44-47.
[12]	何劲波，庄国霖，傅勇强，李奎，陈乃晓. 600MW机组制粉系统优化调整试验研究[J]. 华电技术, 2014, 36(8): 10-13.
[13]	桂小燕，匡仁钦. 700MW超临界锅炉运行优化[J]. 华电技术, 2014, 36(7): 65-66.
[14]	邹绍波，王仁利. 锅炉排烟温度高的影响因素及处理措施[J]. 华电技术, 2014, 36(11): 40-42.
[15]	马良，刘国峰. 300MW机组自然循环锅炉运行优化试验[J]. 华电技术, 2014, 36(1): 11-17.