汽轮机叶片叶身及围带的涡流检测

华电技术 ›› 2016, Vol. 38 ›› Issue (9): 36-37.

汽轮机叶片叶身及围带的涡流检测

华电电力科学研究院山东分院，济南 250014

出版日期:2016-09-25 发布日期:2016-12-14

Eddy current testing of steam turbine blade body and its shroud

Shandong Branch of Huadian Electric Power Research Institute, Ji’nan 250014, China

Online:2016-09-25 Published:2016-12-14

摘要/Abstract

摘要：

摘要：针对汽轮机叶片检测的特殊性(如形状不规则、检测空间限制、检测比例低、检测方法少等特点)，采用笔式单探头和指套式单探头进行涡流检测试验。模拟裂纹对比试样试验表明，2种探头均可有效检出缺陷，便于操作的指套式单探头灵敏度相量幅度比笔式单探头低50%左右，边缘或拉筋孔的检测需开发专用探头或工装来保障探头移动平稳。现场应用表明，涡流检测叶身及围带有一定优势，是常规检测方法的有效补充。

关键词:

关键词：汽轮机, 叶片, 涡流检测, 试样, 围带

Abstract:

Abstract:For the particularity of turbine blade test, such as the shape irregularity, test space limitation, low test ratio and few test methods, etc., this paper carried out the eddy current testing experiments using penbased single probe and fingertip single probe. The simulating crack comparison tests showed that both of the two kinds of probes could effectively detect defects, the phasor amplitude sensitivity of easyoperating fingertip single probe is about 50% lower than the penbased single probe, and the detection of edge or lacing hole need to develop a special probe or tooling in order to ensure the smooth moving of probe. Field application indicated that the eddy current testing have certain advantages for the steam turbine blade body and its shroud, which is an effective supplement to conventional detection methods.

Key words:

Keywords:steam turbine, blade, eddy current testing, probe, shroud

刘金秋，夏晓涛，冯翌轩，尚伟. 汽轮机叶片叶身及围带的涡流检测[J]. 华电技术, 2016, 38(9): 36-37.

LIU Jinqiu, XIA Xiaotao, FENG Yixuan, SHANG Wei.

Eddy current testing of steam turbine blade body and its shroud

[J]. Huadian Technology, 2016, 38(9): 36-37.

[1]	范大千, 刘博嵩, 郭鹏. 基于AdaBoost算法的多参数模型风电机组叶片结冰监测与预警研究[J]. 华电技术, 2021, 43(8): 20-26.
[2]	张骏, 苏阳, 李勇, 丛星亮. 大型风力机叶片涡流发生器流动控制的数值研究[J]. 综合智慧能源, 2021, 43(12): 66-71.
[3]	刘帅，郑立军，俞聪，高新勇，刘国弼，赵春风，张晓丽，曹创，徐建鹏. 200MW机组切除低压缸进汽供热改造技术分析[J]. 华电技术, 2020, 42(6): 76-82.
[4]	李新凯，刘蔚，张廷军，王佩明，赵健，孙曼杰. 综合能源背景下风电叶片雷击防护安全研究[J]. 华电技术, 2020, 42(2): 63-67.
[5]	侯家绪，周书康，李艳军. 某电厂低压转子末二级叶片开裂原因分析[J]. 华电技术, 2019, 41(2): 28-31.
[6]	包桓铭，刘柯楠. 国内某核电站循环水系统调试工期优化方案研究[J]. 华电技术, 2018, 40(7): 70-73.
[7]	张绍兴. 双级动叶可调轴流式引风机动叶卡涩原因分析及处理[J]. 华电技术, 2018, 40(1): 36-38.
[8]	詹鹏，郭进学，陈晓明. 基于叶片摆振控制降低风机故障率[J]. 华电技术, 2017, 39(4): 15-18.
[9]	李有信. 直吹式制粉系统粉管堵塞试验测试及处理[J]. 华电技术, 2017, 39(1): 38-39.
[10]	方建勇. 某汽轮机盘车装置损坏原因分析及改进措施[J]. 华电技术, 2017, 39(1): 53-55.
[11]	刘成柱. 基于日立系统的东汽机组PLU设计原理分析及调试方法[J]. 华电技术, 2016, 38(9): 46-47.
[12]	杨占岗. TC2F汽轮机交流油泵电机过电流故障原因分析[J]. 华电技术, 2016, 38(8): 40-41.
[13]	彭博伟. 660MW机组热应力控制策略的特点及应用分析[J]. 华电技术, 2016, 38(8): 51-53.
[14]	黄小军. 600MW汽轮机的优化启动[J]. 华电技术, 2016, 38(7): 20-24.
[15]	高强生1，赵苏平2. 300MW汽轮机低压转子叶片腐蚀原因分析及对策[J]. 华电技术, 2016, 38(7): 43-46.