矩形截面直角弯管内置导流板的优化研究

华电技术 ›› 2019, Vol. 41 ›› Issue (8): 32-37.

矩形截面直角弯管内置导流板的优化研究

1.云南电网有限责任公司电力科学研究院，昆明〓650217； 2.华北电力大学控制与计算机工程学院，北京〓102206

出版日期:2019-08-26 发布日期:2019-09-06

Optimization research on deflectors installed in rightangle bend tube with rectangular section

1.Electric Power Research Institute,Yunnan Power Grid Company Limited,Kunming 650217, China; 2.School of Control and Computer Engineering, North China Electric Power University,Beijing 102206, China

Online:2019-08-26 Published:2019-09-06

摘要/Abstract

摘要：

为了改善矩形截面直角弯管内流场均匀性，利用FLUENT软件对弯管内流体流动情况进行数值模拟计算，分析了不同数量和不同结构导流板的布置对弯管内流场均匀性、局部阻力和能量损失的影响。结果表明：弯管内未加装导流板时，流速分布不均匀、出现涡流和二次流，而布置导流板后可以有效提高流场均匀性；布置合理数量的导流板不仅能有效改善流场均匀性、完全消除因直角弯头引起的涡流和二次流，而且能大幅度减小流动阻力和能量损失。通过对3种不同设计方案的导流板进行数值模拟分析，获得最优的导流板数量和结构。

关键词:

font-size: 10.5pt, mso-spacerun: 'yes', mso-font-kerning: 1.0000pt">直角弯管, 流场均匀性, 导流板, 数值模拟

Abstract:

In order to improve the flow field uniformity in a rightangle bent tube with rectangular section, the fluid flow in the elbow was numerically simulated by FLUENT software. The effects of the uniformity of flow field and local resistance and energy loss in the elbow were analyzed by using different quantities and structures of flow deflectors. The results show that the velocity distribution is not uniform, vortex and secondary flow occurs when the flow deflectors are not installed in the elbow, while the uniformity of flow field can be effectively improved after arranging the deflector plates; using a reasonable number of baffles can not only effectively improve the flow field uniformity and completely eliminate the vortex and secondary flow caused by the rightangle elbow, but also greatly reduce the flow resistance and energy loss. Through the numerical simulation analysis of the deflectors of three different design schemes, the optimal number and structure of the deflectors are obtained.

Key words:

font-size: 10.5pt, mso-spacerun: 'yes', mso-font-kerning: 1.0000pt">rightfont-size: 10.5pt, mso-spacerun: 'yes', mso-font-kerning: 1.0000pt">font-size: 10.5pt, mso-spacerun: 'yes', mso-font-kerning: 1.0000pt">angle bent tube, flow field uniformity, deflectors, numerical simulation

王周君1,2，黎星华2，唐立军1，段泉圣2. 矩形截面直角弯管内置导流板的优化研究[J]. 华电技术, 2019, 41(8): 32-37.

WANG Zhoujun1,2，LI Xinghua2，TANG Lijun1，DUAN Quansheng2.

Optimization research on deflectors installed in rightangle bend tube with rectangular section [J]. Huadian Technology, 2019, 41(8): 32-37.

[1]	陈宏岩，唐治国，陈琦，王永旭，吴路明. 基于区间潮流算法的低压配电网分散无功补偿优化方法[J]. 华电技术, 2020, 42(6): 1-5.
[2]	王利杰，王鸿腾，孙波. 基于稳定性试验数据的水轮发电机组运行区域划分[J]. 华电技术, 2020, 42(6): 6-9.
[3]	吴路明，薛明军，陈琦，王永旭，唐治国，陈宏岩. 一起电子互感器异常引发的复杂发展性故障分析及改进[J]. 华电技术, 2020, 42(6): 10-15.
[4]	牛犇. 以软化水为水源的循环冷却水水质控制技术[J]. 华电技术, 2020, 42(6): 16-21.
[5]	尚力阳，范素香，张智勇，于鹏辉，何勇，季艳茹. 输水干渠智能化拦藻设备设计及应用[J]. 华电技术, 2020, 42(6): 22-24.
[6]	王云鹏，段小云. 330MW热电联产机组锅炉低氮燃烧器改造和燃烧调整[J]. 华电技术, 2020, 42(6): 35-42.
[7]	邵磊，潘广强，张裕全，储昊，曹伟. 声波解堵提效技术在尿素热解炉上的应用[J]. 华电技术, 2020, 42(6): 43-46.
[8]	王志永，许贺，朱慧敏，葛俊沛，许静. 燃气-蒸汽联合循环机组余热锅炉热效率计算模型对比分析[J]. 华电技术, 2020, 42(6): 47-51.
[9]	王东振，葛磊蛟. 面向燃气发电机组出口电缆同相多根并联运行优化策略[J]. 华电技术, 2020, 42(6): 52-56.
[10]	高涌，田鑫，吴寅琛. 燃气轮机空气过滤系统预过滤器改造效果评估[J]. 华电技术, 2020, 42(6): 57-61.
[11]	行武，郭晓，王哲，史博伦. 参数识别原理在磁控型并联电抗器保护中的应用[J]. 华电技术, 2020, 42(6): 47-51.
[12]	尤佳，王润芳，马大卫，姜少毅，朱仁斌，陈剑，王克峰. 基于合肥市PM2.5源解析的电能替代效果评估[J]. 华电技术, 2020, 42(1): 1-7.
[13]	高正来1，周国山1，沈东1，潘正琪1，周威1，信晓颖2，李艳2. 湿式电除尘器与氨法脱硫协同脱除多种污染物效果研究[J]. 华电技术, 2020, 42(1): 25-28.
[14]	刘志敏1，2，丁阳1，徐婷婷1，白云山1. 燃气轮机燃烧压力脉动与测量关键技术研究 [J]. 华电技术, 2019, 41(9): 1-5.
[15]	熊远南1，汪永威1，陈英武2. 电除尘器进口烟箱结构设计对气流分布的影响及数值模拟优化[J]. 华电技术, 2019, 41(9): 6-11.