增量式函数观测器在W形火焰直流锅炉汽温控制中的应用

华电技术 ›› 2012, Vol. 34 ›› Issue (2): 65-67.

增量式函数观测器在W形火焰直流锅炉汽温控制中的应用

兰立刚1，郭同书2，马睿1，刘明礼1，朱能飞2

1.四川省电力工业调整试验所，四川成都610072；2.国电南京自动化股份有限公司，江苏南京210031

收稿日期:1900-01-01 修回日期:1900-01-01 出版日期:2012-02-25

Application of increment function observer in steam temperature control of Wshape flame oncethrough boiler

LAN Ligang1, GUO Tongshu2, MA Rui1, LIU Mingli1, ZHU Nengfei2

1.Commissioning and Test Institute of Sichuan Electric Power Industry, Chengdu 610072, China; 2.Guodian Nanjing Automation Company Limited, Nanjing 210031, China

Received:1900-01-01 Revised:1900-01-01 Published:2012-02-25

摘要/Abstract

摘要： 针对W形火焰超临界直流锅炉过热蒸汽温度与煤水比控制耦合性强、炉膛温度过高易结焦、过热汽温控制对象迟延时间和惯性时间长等特点，在华电四川珙县电厂2×600MW机组过热汽温串级PID控制系统中加入增量式函数观测器状态反馈控制。实际调试及应用表明，过热汽温动态特性明显改善，变工况时过热汽温偏差控制在允许范围之内。方案具有较强的实用性，为超临界机组的控制提供了参考和借鉴。

关键词: W形火焰, 超临界直流锅炉, 过热汽温, 增量式函数观测器, 状态反馈

Abstract: The control of the Wshape flame supercritical oncethrough boiler has some features, which include that the overheated steam temperature control and the coalwater ratio control are strong coupled，the furnace temperature is too high and leads severe coking，the control object of the overheated steam temperature has larger lag and longer inertia time and others. Aiming at above features, the increment function observer and state feedback control were added into the overheated steam temperature cascade PID control system of the 2×600MW unit in GongXian power plant. The practical commissioning and application show that the dynamic characteristics of the overheated steam temperature were significantly improved; and in the process of condition changing, the deviation of overheated steam temperature was controlled within the allowed range. The design scheme has better practical applicability and provides certain reference for supercritical units in steam temperature control.

Key words: W-shape flame, supercritical once-through boiler, overheated steam temperature, increment function observer, state feedback

兰立刚;郭同书;马睿;刘明礼;朱能飞. 增量式函数观测器在W形火焰直流锅炉汽温控制中的应用[J]. 华电技术, 2012, 34(2): 65-67.

LAN Ligang;GUO Tongshu;MA Rui;LIU Mingli;ZHU Nengfei. Application of increment function observer in steam temperature control of Wshape flame oncethrough boiler[J]. Huadian Technology, 2012, 34(2): 65-67.

[1]	史耕金, 李东海, 丁艳军. 基于概率鲁棒的改进自抗扰控制器设计[J]. 综合智慧能源, 2022, 44(10): 57-64.
[2]	武岳. W形火焰锅炉粉量均匀性优化特性研究[J]. 华电技术, 2018, 40(1): 5-9.
[3]	杨飞平 1，杨柱 1，唐真华 2 . 600MW超临界W形火焰锅炉水冷壁开裂解决方案[J]. 华电技术, 2014, 36(1): 33-35.
[4]	贾永会. 660MW机组W形火焰锅炉燃烧优化调整[J]. 华电技术, 2012, 34(5): 4-7.
[5]	陈辉;刘仕辉;黄启龙;王圣;李朝兵. 660MW机组超临界直流锅炉的调试[J]. 华电技术, 2012, 34(5): 1-3.
[6]	朱能飞;林大忠;宋丽红. 600MW超临界W形火焰锅炉机组控制系统设计应用[J]. 华电技术, 2012, 34(3): 35-37.
[7]	马士东;朱道华;马运平. 超临界直流锅炉省煤器爆管泄漏原因分析[J]. 华电技术, 2012, 34(1): 59-60.
[8]	汪潮洋;崔育奎;. 超临界直流锅炉冷态空气动力场研究[J]. 华电技术, 2011, 33(3): 8-10.
[9]	郭同书;赵明;朱能飞;李雷. 600MW超临界W形火焰锅炉机组给水控制策略分析[J]. 华电技术, 2011, 33(12): 4-7.
[10]	丁鹏. 超临界直流锅炉水冷壁设计初探[J]. 华电技术, 2008, 30(9): 30-32.
[11]	王锋;周黎辉;张自华. 超临界直流锅炉启动系统及其设计[J]. 华电技术, 2008, 30(8): 36-40.
[12]	何同祥;刘会娟;刘会赏. 300MW机组MCS子控制系统优化[J]. 华电技术, 2008, 30(11): 72-75.