核电站凝汽器管板钛复层修复工艺

华电技术 ›› 2013, Vol. 35 ›› Issue (5): 48-51.

核电站凝汽器管板钛复层修复工艺

任健康，魏波

(三门核电有限公司，浙江三门317112)

收稿日期:1900-01-01 修回日期:1900-01-01 出版日期:2013-05-25

Repairing technology of titanium coating on tube plate of condenser of nuclear power plant

REN Jiankang, WEI Bo

(CNNC Sanmen Nuclear Power Company Limited, Sanmen 317112, China)

Received:1900-01-01 Revised:1900-01-01 Published:2013-05-25

摘要/Abstract

摘要： 核电站凝汽器管板钛复层损坏导致的后果很严重，凝汽器检修中必须对管板损坏高度重视，并制订详细的检修方案。针对三门核电有限公司 #1机组凝汽器安装过程中管板钛复层损坏的实际情况，结合凝汽器运行维护手册，全面分析了管板钛复层可能出现的损坏形式并制订了相应的修复方案。

关键词: 核电站, 凝汽器, 管板, 钛复层, 焊接, 修复

Abstract: The damage of the titanium coating on the tube plate of condenser of nuclear power plant can lead very severe consequences, so it is necessary to pay high attention to the damage of the tube plate in condenser maintenance process and to formulate a detailed maintenance scheme. Aiming at the practical damage situation of titanium coating of tube plate of unit No.1 in Sanmen Nuclear Power Company Limited in condenser installation process, combining with the condenser operation and maintenance manual, the possible damage forms of the titanium coating of the tube plate were analyzed comprehensively, and the corresponding repairing scheme was formulated.

Key words: nuclear power plant, condenser, tube plate, titanium coating, welding, repair

任健康;魏波. 核电站凝汽器管板钛复层修复工艺[J]. 华电技术, 2013, 35(5): 48-51.

REN Jiankang;WEI Bo. Repairing technology of titanium coating on tube plate of condenser of nuclear power plant[J]. Huadian Technology, 2013, 35(5): 48-51.

[1]	程学庆,施佳赟. 某核电站主给水前置泵振动超标治理[J]. 华电技术, 2020, 42(5): 83-88.
[2]	贾辉，曹浩，刘希志，李伟超，陈伟，高建强. 1000MW核电机组主变高压套管介损与环境温度关系试验研究[J]. 华电技术, 2020, 42(2): 68-71.
[3]	邓辉. 高温再热器出口联箱管座角焊缝开裂原因分析[J]. 华电技术, 2019, 41(8): 74-77.
[4]	张俊伟. NG-M701F-R型余热锅炉高压过热器爆管原因分析及解决办法[J]. 华电技术, 2019, 41(7): 46-49.
[5]	钱锡琳. 凝汽器不锈钢管的结垢分析及综合治理[J]. 华电技术, 2019, 41(7): 50-53.
[6]	贤建伟，代术建. 300MW亚临界汽轮机快速结垢原因分析及处理[J]. 华电技术, 2019, 41(5): 78-.80.
[7]	王敏1，王杰2. 600MW超临界机组凝汽器真空度低的原因分析及治理[J]. 华电技术, 2019, 41(3): 59-61.
[8]	王林，刘金秋，夏晓涛. 某450MW燃机冷再三通裂纹原因分析与处理[J]. 华电技术, 2019, 41(2): 32-35.
[9]	侯晓宁1，阿不都克里木·阿布来提2. 超临界间冷机组高背压供热技术的应用分析[J]. 华电技术, 2019, 41(2): 36-38.
[10]	袁捷，钱卫武，施晓炜，韩竞一. 凝汽器真空系统泄漏的原因分析及处理[J]. 华电技术, 2018, 40(8): 59-60.
[11]	包桓铭，刘柯楠. 国内某核电站循环水系统调试工期优化方案研究[J]. 华电技术, 2018, 40(7): 70-73.
[12]	邱永罡. 燃机联合循环机组直接空冷凝气器选型优化[J]. 华电技术, 2018, 40(5): 13-16.
[13]	滕树会. 超超临界机组低温再热器失效分析[J]. 华电技术, 2018, 40(4): 36-39.
[14]	王璐. 660MW机组启动中凝结水系统故障及处理[J]. 华电技术, 2018, 40(4): 52-53.
[15]	高强生. 某燃机电厂凝汽器结垢原因分析及防范措施[J]. 华电技术, 2018, 40(2): 32-34.