GIS bellow expansion joint structure improvement

Abstract

Abstract:

Abstract:Bellow expansion joint structure was improved and compared with original structure under finite element analysis. The result indicated that stress and axial deformation of improved structure was significantly reduced, deformation difference of expansion joint center and margin was reduced, bending moment on bolt was reduced. After improvement, equipment could resist exterior force more effectively, and bear stronger deflection. Thus, bellow expansion structure improvement could effectively resist exterior force, reduce deflection, and ultimately ensure the operating safety and stability of GIS.

Key words:

Keywords:gas insulated switchgear(GIS), bellow, expansion joint, finite element analysis, structure improvement

ZHANG Jing1,ZHANG Zhongwen2,CHU Honghe1,LI Na1,SUN Chao1.

GIS bellow expansion joint structure improvement

[J]. Huadian Technology, 2016, 38(8): 8-11.

[1]	WANG Yunpeng,DUAN Xiaoyun. Retrofit and combustion adjustment of a lownitrogen burner in a 330MW cogeneration unit [J]. Huadian Technology, 2020, 42(6): 35-42.
[2]	LIU Xue，LI Guodong，LIN Weining，CHE Chi. Finite element analysis on special pipe fittings of air cooling pipelines for solar thermal power plants [J]. Huadian Technology, 2020, 42(5): 20-23.
[3]	XIA Huaipeng，WANG Zhengrong，WANG Yang，HU Xiaofu，WU Chong. Study on the structure design of quadrangle towerframe steel chimney [J]. Huadian Technology, 2019, 41(9): 22-24.
[4]	XIA Huaipeng, WANG Yang, ZHAO Bing. ANSYS analysis of wet electrostatic precipitator placed on top of desulfurization tower [J]. Huadian Technology, 2018, 40(9): 10-14.
[5]	ZHAO Xiaowei，ZHANG Qian，SHI Xiaofei，ZENG Guang. Finite element analysis of lower bearing ring beam of PZQ1400 attached selflifting tower crane [J]. Huadian Technology, 2018, 40(11): 36-39.
[6]	XIA Huaipeng, WANG Yang, ZHAO Bing. Selection and design of temporary chimney placed on the top of desulfurization tower [J]. Huadian Technology, 2018, 40(1): 62-64.
[7]	XING Hao, ZHANG Wei, ZHANG Yuanqing. Application of pure titanium flue gas duct expansion joint in thermal power plant wet desulphurization analysis [J]. Huadian Technology, 2017, 39(11): 54-56.
[8]	SI Jianwei. A new arc orbit running design of one way gantry crane [J]. Huadian Technology, 2016, 38(9): 23-25.
[9]	HU Ting1, YAN Yuping2. Discussion on the calculation formula of deflection at effective cantilever end of gantry crane [J]. Huadian Technology, 2016, 38(12): 1-5.
[10]	WANG Sen1,AN Hong2,ZHU Bin2,WANG Shushan2. Failure analysis and design optimization of non metallic expansion joint at inlet duct of denitrification device [J]. Huadian Technology, 2016, 38(1): 64-67.
[11]	GAO Lintao, ZHANG Wei, LU Chengzhi, LIN Qian, ZHANG Nan. Study on influence of different initial defects of single angle steel on ultimate bearing capacity [J]. Huadian Technology, 2015, 37(8): 40-42.
[12]	SUN Yewen1, CAI Dongsheng2, ZHUANG Haiqing1, XU Zhibo1. Finite element analysis on translation of steel support of induced draft fan in thermal power unit [J]. Huadian Technology, 2015, 37(3): 26-28.
[13]	MIAO Ruiling. The finite element analysis of the slag warehouse based on ANSYS software [J]. Huadian Technology, 2015, 37(12): 15-16.
[14]	TANG Yongtao, NIU Junyan. Application of ANSYS finite element analysis software in type selection and design of belt frame [J]. Huadian Technology, 2014, 36(8): 19-20.
[15]	LI Wei, ZHANG Qian. Finite element analysis on structure of electriclifting formwork platform used in chimney construction based on ALGOR software [J]. Huadian Technology, 2014, 36(12): 8-11.

GIS bellow expansion joint structure improvement

Knowledge

Abstract

Cite this article

share this article

References

Related Articles 15

Recommended Articles

Metrics

Comments