超超临界机组低压缸拼缸及焊接变形控制

华电技术 ›› 2009, Vol. 31 ›› Issue (3): 14-17.

超超临界机组低压缸拼缸及焊接变形控制

刘鸿国

华能玉环电厂,浙江玉环 317604

收稿日期:1900-01-01 修回日期:1900-01-01 出版日期:2009-03-25

Deformation control in assembling and welding of ultra supercritical unit low pressure cylinder

LIU Hongguo

Yuhuan Power Plant, China Huaneng Group, Yuhuan 317604, China

Received:1900-01-01 Revised:1900-01-01 Published:2009-03-25

摘要/Abstract

摘要： 华能玉环电厂超超临界机组低压缸外型尺寸较大｡在施工中通过合理的拼缸方法,采用科学的二氧化碳气体保护焊+同步分段倒退焊工艺,有效地控制了低压缸拼缸连接焊接变形｡经测量,变形量小于设计值,为其他超超临界百万电厂的拼缸焊接提供有益参考｡

关键词: 低压缸拼缸, 熔化极气体保护焊, 变形控制

Abstract: The low pressure cylinder of ultra supercritical unit in Yuhuan Power Plant of China Huaneng Group has larger contour structure size.By adopting rationale method and scientific welding process: CO2 gasshield welding + synchronous section backwards welding process, the deformation in assembling and welding of low pressure cylinder was controlled effectively, the deformation values were smaller than the design values. This experience could be a useful reference for the assembling and welding of other ultra supercritical unit.

Key words: low pressure cylinder assembling, metal gas-shield welding, deformation control

刘鸿国. 超超临界机组低压缸拼缸及焊接变形控制[J]. 华电技术, 2009, 31(3): 14-17.

LIU Hongguo. Deformation control in assembling and welding of ultra supercritical unit low pressure cylinder[J]. Huadian Technology, 2009, 31(3): 14-17.