滨海核电厂取、排水口平面布置工程实例分析

华电技术 ›› 2011, Vol. 33 ›› Issue (2): 8-14.

滨海核电厂取、排水口平面布置工程实例分析

周金全

中国大唐集团科技工程有限公司，北京100097

收稿日期:1900-01-01 修回日期:1900-01-01 出版日期:2011-02-25 发布日期:2011-02-25

Analysis on engineering project of water intake and outlet layout for coastal nuclear power plant

ZHOU Jinquan

China Datang Technologies and Engineering Corporation Limited, Beijing 100097, China

Received:1900-01-01 Revised:1900-01-01 Online:2011-02-25 Published:2011-02-25

摘要/Abstract

摘要： 滨海核电厂取、排水工程设计要考虑海岸稳定、海床泥沙冲淤变化和厂址海域的潮位、波浪、泥沙、海生物等方面的影响。通过工程实例分析，提出了水工布置、结构形式和散热能力之间的优化方案以及取、排水工程设计中的要点。最后指出，滨海核电厂取、排水工程必须进行多方案的技术经济比较论证、水工数模计算及物模试验后，才能确定工程方案。

关键词: 滨海核电厂, 海洋水文, 取, 排水口, 优化方案

Abstract: In the design of water intake and drainage engineering for coastal nuclear power plants, the influence of multiple aspects, such as the coast stability, the variation of sediment flushing on the seabed, the tide level, the wave, the sediment and the sea creatures in the sea area near the plant, must be considered. Through the engineering project analysis, the optimized scheme between the hydraulic engineering allocation, the structure and the heat dissipation capacity was put forward, and the key points in design of the water intake and drainage project were given. It was pointed out finally that for the water intake and drainage project of coastal nuclear power plant, the engineering scheme must be determined on the base of the technical and economical comparison and argumentation of several schemes, the hydraulic numerical simulation calculation and the physical model experiment. 

Key words: coastal nuclear power plant, marine hydrology, water intake and outlet, optimized scheme

周金全. 滨海核电厂取、排水口平面布置工程实例分析[J]. 华电技术, 2011, 33(2): 8-14.

ZHOU Jinquan. Analysis on engineering project of water intake and outlet layout for coastal nuclear power plant[J]. Huadian Technology, 2011, 33(2): 8-14.

[1]	谈智玲, 陈才明, 徐胜朝, 吴志宏, 宋寅, 王朋飞. 基于振动信号分析的滚动轴承寿命预测方法研究[J]. 华电技术, 2021, 43(5): 36-44.
[2]	胡大龙,冉琼,王正江,熊卫军,许臻,杨阳,王博,卢剑,姜琪 . 直流冷却型火电厂水污染防治技术研究[J]. 华电技术, 2020, 42(3): 1-7.
[3]	密大奎，张传艮. 脱硝系统氨逃逸分析仪测量技术存在的问题及优化方案[J]. 华电技术, 2019, 41(8): 57-60.
[4]	闫欢欢. 烟气连续排放监测系统优化改造[J]. 华电技术, 2018, 40(8): 69-71.
[5]	张燕. 电站锅炉余热利用系统取水问题的研究与应用[J]. 华电技术, 2018, 40(4): 22-24.
[6]	吴鑫杰. 充氮气油浸式变压器取油样技术探讨[J]. 华电技术, 2018, 40(2): 46-47.
[7]	刘龙翔. 600MW超临界火力发电机组凝汽器真空测量改造简析[J]. 华电技术, 2017, 39(8): 39-41.
[8]	杨功晓，马倩. 取料机主耙张紧轮脱轨和油缸底座开焊原因分析及处理[J]. 华电技术, 2017, 39(4): 46-47.
[9]	程文光，曹云改. 条形储煤场储煤设备的几种布置形式[J]. 华电技术, 2017, 39(11): 39-42.
[10]	郑红发. 湛江调顺电厂循环水泵改造分析[J]. 华电技术, 2017, 39(10): 38-40.
[11]	郭联合. 哈密徐矿条形煤场MQ1200/68型门式取料机简析[J]. 华电技术, 2016, 38(6): 11-12.
[12]	张久昌，杨功晓. 大跨度门式取料机运行分析[J]. 华电技术, 2016, 38(12): 35-36.
[13]	邓如勇，王磊，颜敏. 升降雾笼式干雾除尘系统在圆形煤场堆取料机上的应用[J]. 华电技术, 2016, 38(12): 53-55.
[14]	李政，燕翔，王选凡. 糯扎渡水电厂大型机组顶盖取水试验[J]. 华电技术, 2016, 38(11): 7-10.
[15]	张奇. 顶盖取水作为机组技术供水的不适性研究[J]. 华电技术, 2015, 37(9): 17-18.