CHTC5/5 SP-2型给水泵总窜动量和工作间隙的测量调整

华电技术 ›› 2011, Vol. 33 ›› Issue (3): 60-61.

CHTC5/5 SP-2型给水泵总窜动量和工作间隙的测量调整

黄献华

新疆华电红雁池发电有限责任公司，新疆乌鲁木齐830047

收稿日期:1900-01-01 修回日期:1900-01-01 出版日期:2011-03-25 发布日期:2011-03-25

Measurement and adjustment for total axial drifting value and working clearance of CHTC5/5SP2 feed pump

HUANG Xianhua

Xinjiang Huadian Hongyanchi Power Generation Corporation Limited, Urumqi 830047, China

Received:1900-01-01 Revised:1900-01-01 Online:2011-03-25 Published:2011-03-25

摘要/Abstract

摘要： 给水泵总窜动量、工作间隙的测量与调整是给水泵检修工作中的重要环节，其根本目的是使给水泵叶轮与导叶槽道中心位置始终保持一致，防止转动部件与静止部件摩擦，提高水泵效率。从给水泵的平衡原理、轴向推力的测量与调整入手，结合实际工作经验，对提高给水泵检修质量的问题进行了论述。

关键词: 轴向力, 窜动量, 间隙, 调整, 测量方法

Abstract: The measurement and adjustment of total axial drifting value and working clearance of feed pump are the important links in feed pump overhaul; and its basic purpose is to make the feed pump impeller to be always in accordance with the center position of the guide vane slot and avoid the friction between the rotating part and the static part of the pump; which will be helpful to enhancing the pump efficiency. According to the equilibrium principle of feed pump, starting from the measurement and adjustment of the axial thrust, combining with the practical working experience, the problems on enhancing the feed pump overhaul quality were expounded. 

Key words: axial force, axial drifting value, clearance, adjustment, measurement method

黄献华. CHTC5/5 SP-2型给水泵总窜动量和工作间隙的测量调整[J]. 华电技术, 2011, 33(3): 60-61.

HUANG Xianhua. Measurement and adjustment for total axial drifting value and working clearance of CHTC5/5SP2 feed pump[J]. Huadian Technology, 2011, 33(3): 60-61.

[1]	吉斌, 孙绘, 昌力, 张丹丹. 黏性电力用户参与需求侧响应的行为决策建模与分析[J]. 综合智慧能源, 2022, 44(2): 80-88.
[2]	王云鹏，段小云. 330MW热电联产机组锅炉低氮燃烧器改造和燃烧调整[J]. 华电技术, 2020, 42(6): 35-42.
[3]	丁阳，郝建刚，谢大幸. 9E型燃气轮机DLN1.0燃烧系统数值分析[J]. 华电技术, 2020, 42(5): 31-36.
[4]	徐静静，康慧，张瑞寒. 清洁燃煤供热与能源的综合利用[J]. 华电技术, 2019, 41(11): 36-39.
[5]	任新生. 火电企业供热生产集中化、智能化的改造实践[J]. 华电技术, 2019, 41(11): 70-75.
[6]	刘冠军. 东汽X300P型汽轮机轴向间隙计算及胀差大原因分析[J]. 华电技术, 2019, 41(1): 40-44.
[7]	虞涌. 600MW汽轮机全实缸汽封间隙调整工艺[J]. 华电技术, 2018, 40(9): 44-46.
[8]	韩荣利，冯仁海. 660MW超超临界机组再热汽温620℃运行技术探索与实践[J]. 华电技术, 2018, 40(7): 18-21.
[9]	陈建飞. 660MW单系列机组一次风机电机轴瓦温度高的原因分析及处理[J]. 华电技术, 2018, 40(6): 58-59.
[10]	任亮. 直接空冷机组冬季运行的防冻要点[J]. 华电技术, 2018, 40(5): 53-55.
[11]	刘恩生1，周新刚2. 双级动叶可调轴流引风机卡涩原因分析与改进[J]. 华电技术, 2018, 40(2): 50-51.
[12]	徐婷婷，丁阳，张梦可，刘志敏. 燃气轮机燃烧调整国内外研究技术综述[J]. 华电技术, 2018, 40(12): 8-12.
[13]	李茂1，游必超1，后颖黎1，王林2. 35t/h启动锅炉超温分析与技术改造[J]. 华电技术, 2018, 40(12): 13-15.
[14]	崔修强. 低氮燃烧器改造对锅炉运行影响探析[J]. 华电技术, 2018, 40(11): 59-61.
[15]	王才文. 某M701DA型燃气-蒸汽联合循环机组IGV开度优化调整[J]. 华电技术, 2017, 39(8): 44-47.