垃圾发电厂锅炉受热面积灰结焦特性及清灰装置的应用

华电技术 ›› 2012, Vol. 34 ›› Issue (11): 70-74.

垃圾发电厂锅炉受热面积灰结焦特性及清灰装置的应用

邹金生1，王志强2

1.深圳市能源环保有限公司，广东深圳518052；2.山东大学能源与动力工程学院，山东济南250061

收稿日期:1900-01-01 修回日期:1900-01-01 出版日期:2012-11-25 发布日期:2012-11-25

Soot formation and slagging characteristics of heating surface of boiler in garbage power plant and application of soot cleaning device

ZOU Jinsheng1, WANG Zhiqiang2

1.Shenzhen Energy Environment Engineering Company Limited, Shenzhen 518052, China; 2.School of Energy and Power Engineering, Shandong University, Jinan 250061, China

Received:1900-01-01 Revised:1900-01-01 Online:2012-11-25 Published:2012-11-25

摘要/Abstract

摘要： 介绍了垃圾发电厂锅炉受热面的积灰、结焦特性，常用的清灰方式及应用情况。针对深圳某垃圾焚烧发电厂锅炉受热面积灰、结焦致使机组无法长周期连续运行的问题，进行了机械振打与激波清灰相结合的技术改造，解决了困扰该厂余热锅炉受热面管屏积灰、结焦和振打爆管的难题，改造效果良好。

关键词: 垃圾发电, 锅炉受热面, 积灰, 结焦, 清灰装置

Abstract: The soot formation and slagging characteristics of the heating surface of the boiler in garbage power plants were introduced, and the common soot cleaning mode and its application were described. Aiming at the problem of soot formation and slagging of the boiler heating surface in a garbage power plant in the Shenzhen, which causes the plant can not operate continuously in longer period, a technical reformation using the mechanical shaking combined with shock wave technology was carried out. The difficult problems of soot formation and slagging on the waste heat boiler heating surface tube platen of the plant and tube cracking caused by shaking, which puzzled the power plant for long time, were solved, and good reformation effect was obtained.

Key words: garbage power generation, heating surface of boiler, soot formation, slagging, soot cleaning device

邹金生;王志强. 垃圾发电厂锅炉受热面积灰结焦特性及清灰装置的应用[J]. 华电技术, 2012, 34(11): 70-74.

ZOU Jinsheng;WANG Zhiqiang. Soot formation and slagging characteristics of heating surface of boiler in garbage power plant and application of soot cleaning device[J]. Huadian Technology, 2012, 34(11): 70-74.

[1]	邢军1，何超1，舒忠平2. 移动式声波吹灰器在660MW机组锅炉省煤器的应用[J]. 华电技术, 2019, 41(7): 73-76.
[2]	崔晓光. 1000MW二次再热塔式锅炉塌灰原因分析及应对措施[J]. 华电技术, 2018, 40(7): 56-58.
[3]	代静轶，戴斌，马克聪. 600MW&W&型火焰锅炉垮灰灭火原因分析及防范措施[J]. 华电技术, 2018, 40(3): 39-41.
[4]	朱国斌，贾少威，王警卫，江野，刘文生，王东. 电站锅炉受热面管内壁腐蚀缺陷检测技术研究[J]. 华电技术, 2018, 40(11): 12-16.
[5]	白洪森，郭金城，胡桢. 某电厂350MW锅炉燃烧试验调整和防结焦试验研究[J]. 华电技术, 2017, 39(7): 28-31.
[6]	符思聪. 350MW机组电袋除尘器跳闸原因分析及处理措施[J]. 华电技术, 2017, 39(7): 71-72.
[7]	饶红建. 一种防止锅炉结焦、掉焦新方法的研究应用[J]. 华电技术, 2017, 39(6): 41-43.
[8]	张波，张伟斌，宋修科. 300MW机组锅炉掺烧低灰熔点煤种探讨与实践[J]. 华电技术, 2016, 38(8): 42-43.
[9]	杜佳军. 循环流化床锅炉管式空气预热器积灰与漏风治理[J]. 华电技术, 2016, 38(5): 54-56.
[10]	张磊. 除焦剂在大型火电机组锅炉的应用与研究[J]. 华电技术, 2016, 38(4): 18-21.
[11]	王承亮，姜仕涛. 300MW锅炉结焦和飞灰高冷态动力场试验研究[J]. 华电技术, 2016, 38(2): 14-17.
[12]	崔恒. 燃煤电厂锅炉结渣在线监测与诊断技术的研究现状[J]. 华电技术, 2016, 38(11): 23-25.
[13]	孙海元. 超临界锅炉水冷壁高温腐蚀原因分析及改造措施[J]. 华电技术, 2015, 37(7): 29-31.
[14]	李鹏，曾琦，李东本. 燃用准东煤锅炉设计优化建议[J]. 华电技术, 2015, 37(6): 70-71.
[15]	陈飞. 660MW前后墙对冲燃烧锅炉结焦原因分析与治理[J]. 华电技术, 2015, 37(4): 62-63.