汽轮机冲转过程中轴瓦振动超标原因分析及处理

华电技术 ›› 2012, Vol. 34 ›› Issue (2): 62-64.

汽轮机冲转过程中轴瓦振动超标原因分析及处理

曹玉生

广东省连州粤连电厂有限公司连州发电厂，广东连州513400

收稿日期:1900-01-01 修回日期:1900-01-01 出版日期:2012-02-25 发布日期:2012-02-25

Analysis and treatment of overvibration of bearing bush in turbine rolling process

CAO Yusheng

Lianzhou Power Plant of Guangdong Lianzhou Yuelian Power Plant Company Limited, Lianzhou 513400, China

Received:1900-01-01 Revised:1900-01-01 Online:2012-02-25 Published:2012-02-25

摘要/Abstract

摘要： 广东省连州粤连电厂有限公司连州发电厂 #2机组在做汽轮机润滑油系统交、直油泵试验时，由于润滑油系统过压阀不能正常迅速复位，导致润滑油压低跳机，2次热态冲转过程中都因为 #1轴瓦振动超标而打闸停机。分析了此次故障的主要原因和暴露的问题，提出了相应的防范措施，可供其他电厂参考。


关键词: 汽轮机, 润滑油, 冲转, 轴瓦, 振动, 停机

Abstract: In the Lianzhou Power Plant of Guangdong Lianzhou Yuelian Power Plant Company Limited, at the process of AC and DC oil pump test of the turbine lubrication oil system of unit No.2, the overpressure valve of the lubrication oil system was unable to reset normally and quickly; and this leaded to low oil pressure and tripping of the steam turbine. After this, in two times hotstate rolling processes of the steam turbine, the vibration of bearing bush No.1 was exceeded the standard, the turbine had been tripped. The main reasons of this fault and the exposed problems were analyzed, and the relevant preventive measures were put forward, which can be used as reference for other power plants.

Key words: steam turbine, lubrication oil, rolling, bearing bush, vibration, shut down

曹玉生. 汽轮机冲转过程中轴瓦振动超标原因分析及处理[J]. 华电技术, 2012, 34(2): 62-64.

CAO Yusheng. Analysis and treatment of overvibration of bearing bush in turbine rolling process[J]. Huadian Technology, 2012, 34(2): 62-64.

[1]	马栋梁, 陈辉, 朱延海, 蒋园. 发电机组非计划停机事件的贝叶斯网络分析[J]. 综合智慧能源, 2022, 44(3): 77-82.
[2]	程学庆,施佳赟. 某核电站主给水前置泵振动超标治理[J]. 华电技术, 2020, 42(5): 83-88.
[3]	陈浩，徐军锋. 600MW超临界机组配汽特性对轴系振动的影响[J]. 华电技术, 2019, 41(9): 29-32.
[4]	陆定康，周伟. 工业水泵振动异常分析和处理[J]. 华电技术, 2019, 41(8): 78-80.
[5]	陈啸，徐威，刘利，陈鑫. 某600MW机组汽轮机异常振动的分析及处理[J]. 华电技术, 2019, 41(7): 64-66.
[6]	吴昌浩，曹景芳. 低速钢球磨煤机减速机齿轮断齿故障诊断及分析[J]. 华电技术, 2019, 41(5): 69-72.
[7]	周兴宏. GE PG9171E重型燃机轴振超限的原因及处理[J]. 华电技术, 2019, 41(5): 76-77.
[8]	贤建伟，代术建. 300MW亚临界汽轮机快速结垢原因分析及处理[J]. 华电技术, 2019, 41(5): 78-.80.
[9]	冯泽磊，吴美凤. 基于大数据平台的火电机组实时运行状态监测[J]. 华电技术, 2019, 41(4): 29-32.
[10]	张大佳，杨鹏. 6F.01燃气轮机液压油系统调试故障分析及处理[J]. 华电技术, 2019, 41(3): 29-31.
[11]	王敏1，王杰2. 600MW超临界机组凝汽器真空度低的原因分析及治理[J]. 华电技术, 2019, 41(3): 59-61.
[12]	赵光锋，余亮. PG9171E型燃气轮机交流润滑油泵控制逻辑优化[J]. 华电技术, 2019, 41(3): 62-63.
[13]	宋馨. 汽轮机轴封蒸汽温度波动原因分析与解决方案[J]. 华电技术, 2019, 41(2): 46-48.
[14]	王治辉，宋志强，王钢锋，于泳. 铜川照金电厂汽轮机汽流激振的原因分析及处理[J]. 华电技术, 2019, 41(2): 46-48.
[15]	冯坤. 1000 MW超超临界机组发电机调试期间振动问题的分析及处理[J]. 华电技术, 2019, 41(12): 41-45.