600MW直接空冷机组汽轮机配汽控制策略优化

华电技术 ›› 2012, Vol. 34 ›› Issue (7): 21-22.

600MW直接空冷机组汽轮机配汽控制策略优化

李佳东，周凯，黄振鑫，孟刚

华能铜川电厂，陕西铜川727100

收稿日期:1900-01-01 修回日期:1900-01-01 出版日期:2012-07-25 发布日期:2012-07-25

Optimization of turbine steam distribution control strategy for 600MW direct aircooled unit

LI Jiadong, ZHOU Kai, HUANG Zhenxin, MENG Gang

Huaneng Tongchuan Power Plant, Tongchuan 727100, China

Received:1900-01-01 Revised:1900-01-01 Online:2012-07-25 Published:2012-07-25

摘要/Abstract

摘要： 介绍了国产600MW空冷机组复合阀和顺序阀配汽控制策略的优、缺点，分析了阀序优化前后机组瓦温、轴心轨迹、轴心位置等参数的变化情况，结合工程实例提出了解决方案，供其他电厂汽轮机配汽控制策略优化时参考。

关键词: 复合阀, 顺序阀, 瓦温, 轴心轨迹, 轴心位置

Abstract:

The advantages and disadvantages of the steam distribution control strategy by combination valve and sequence valve for 600MW aircooled unit were introduced. The variations of the parameters, such as the bearing bush temperature, the locus of shaft center, the position of shaft center and others, of the unit before and after optimization of the valve acting sequence were analyzed. Combining with practical project, a solution was proposed, which can be used as reference for other power plants in optimization of steam distribution control strategy.

Key words: combination valve, sequence valve, bearing bush temperature, locus of shaft center, position of shaft center

李佳东;周凯;黄振鑫;孟刚. 600MW直接空冷机组汽轮机配汽控制策略优化[J]. 华电技术, 2012, 34(7): 21-22.

LI Jiadong;ZHOU Kai;HUANG Zhenxin;MENG Gang. Optimization of turbine steam distribution control strategy for 600MW direct aircooled unit[J]. Huadian Technology, 2012, 34(7): 21-22.

[1]	张奇. ６００ＭＷ大型水轮发电机组推力轴承瓦温和油温高原因分析及处理[J]. 华电技术, 2015, 37(10): 54-57.
[2]	郑建锋. 卧轴混流式水轮发电机组轴瓦温度偏高的原因分析及处理[J]. 华电技术, 2015, 37(1): 34-36.
[3]	王贵来，易吉林. 国产弹性金属塑料瓦在600MW水电机组的应用[J]. 华电技术, 2014, 36(2): 8-12.