核电站汽轮机进汽湿度对热力性能试验的影响

华电技术 ›› 2012, Vol. 34 ›› Issue (7): 8-10.

核电站汽轮机进汽湿度对热力性能试验的影响

刘向民

上海发电设备成套设计研究院，上海200240

收稿日期:1900-01-01 修回日期:1900-01-01 出版日期:2012-07-25 发布日期:2012-07-25

The effect on nuclear power station steam turbine thermal performance test by inlet steam moisture

LIU Xiangmin

Shanghai Power Equipment Research Institute，Shanghai 200240

Received:1900-01-01 Revised:1900-01-01 Online:2012-07-25 Published:2012-07-25

摘要/Abstract

摘要： 介绍了核电站汽轮机及其热力系统的基本特点以及蒸汽湿度的测量方法。分析了蒸汽湿度的变化对汽轮机进汽比焓、试验结果的修正及试验总不确定度的影响。在压水堆核电站汽轮机热力性能试验中，某些情况下可采用蒸汽发生器出口处的设计湿度来计算进汽湿度，作为直接测量湿度的替代方法。

关键词: 压水堆, 核电汽轮机, 湿度, 热力性能试验

Abstract: The basic characteristics of nuclear power station steam turbine with its cycle are introduced, as well as the measurement methods of steam moisture. The effect of the changes of steam moisture on steam turbine inlet enthalpy, corrections of test results and total test uncertainty were analyzed. It is presented that in the pressurized water reactor nuclear power turbine performance test the design moisture at outlet of steam generator can be used to calculate the inlet steam moisture under certain circumstances as an alternative method to take place of direct measurement of moisture.

Key words: pressurized water reactor, nuclear power steam turbine, moisture, thermal performance test

刘向民. 核电站汽轮机进汽湿度对热力性能试验的影响[J]. 华电技术, 2012, 34(7): 8-10.

LIU Xiangmin. The effect on nuclear power station steam turbine thermal performance test by inlet steam moisture[J]. Huadian Technology, 2012, 34(7): 8-10.

[1]	李盛杰，温亮. 核反应堆设置安全壳过滤排放系统的必要性分析[J]. 华电技术, 2019, 41(8): 65-69.
[2]	钮志峰，程途. 氢冷发电机吸附式氢气干燥装置运行维护探讨[J]. 华电技术, 2019, 41(7): 58-60.
[3]	李传江. 高压开关柜新型防凝露系统的研究与应用[J]. 华电技术, 2016, 38(8): 16-18.
[4]	成军;杨建军. AP1000与M310改进型压水堆二回路给水系统比较分析[J]. 华电技术, 2013, 35(4): 69-71.
[5]	苗晓冬;徐涌超;殷佩山. 浅析200MW发电机密封油系统存在的问题[J]. 华电技术, 2010, 32(3): 36-39.
[6]	曹德平. 基于VB的发电机氢气数据管理系统[J]. 华电技术, 2009, 31(2): 36-39.