华电技术 ›› 2013, Vol. 35 ›› Issue (1): 19-22.
• 研究与开发 • 上一篇 下一篇
孙永佳,郑东山,姚广秀,庄俊
收稿日期:
修回日期:
出版日期:
SUN Yongjia, ZHENG Dongshan, YAO Guangxiu, ZHUANG Jun
Received:
Revised:
Published:
摘要:
介绍了风力发电中主控系统的作用、特点以及主控系统的通信模式。根据实际需要,采用RS232串口通信,选取BX3100PLC作为Profibus-DP从站设计了风电变流器通信系统,实现与主控系统的Profibus总线通信。论述了系统的原理和程序流程,给出了测试结果
关键词: 风力发电, 风电变流器, 可编程控制器, Profibus总线, RS232串口
Abstract:
bstract:The functions and the features of the master control system in wind power generation system were introduced, and the communication mode of the master control system was described. According to the requirement of the practical project, the communication system of the wind power converter was designed, in which the RS232 serial port communication was adopted, and the BX3100 PLC was selected and used as the ProfibusDP slave station. The Profibus bus communication between the wind power converter and the master control system were realized by the communication system. The principle and the program flow of the system were expounded, and the test results were given.
Key words: wind power generation, wind power converter, programmable logic controller (PLC), Profibus, RS232 serial port
孙永佳;郑东山;姚广秀;庄俊. 基于BX3100 PLC的风电变流器通信系统设计[J]. 华电技术, 2013, 35(1): 19-22.
SUN Yongjia;ZHENG Dongshan;YAO Guangxiu;ZHUANG Jun. Design of communication system of wind power converter based on BX3100 PLC[J]. Huadian Technology, 2013, 35(1): 19-22.
/ 推荐
导出引用管理器 EndNote|Ris|BibTeX
链接本文: https://www.hdpower.net/CN/
https://www.hdpower.net/CN/Y2013/V35/I1/19