AP1000与M310改进型压水堆二回路给水系统比较分析

华电技术 ›› 2013, Vol. 35 ›› Issue (4): 69-71.

AP1000与M310改进型压水堆二回路给水系统比较分析

成军，杨建军

(中国核电工程有限公司河北分公司，河北石家庄050021)

收稿日期:1900-01-01 修回日期:1900-01-01 出版日期:2013-04-25 发布日期:2013-04-25

Comparative analysis on feedwater systems in secondary loop of pressurized water reactors AP1000 and improved M310

CHENG Jun, YANG Jianjun

(Hebei Branch of China Nuclear Power Engineering Company Limited, Shijiazhuang 050021, China)

Received:1900-01-01 Revised:1900-01-01 Online:2013-04-25 Published:2013-04-25

摘要/Abstract

摘要： 以三代AP1000型与M310改进型压水堆核电站二回路给水系统为例，对给水泵调节阀组配置及主给水泵配置方式进行了比较，分析了AP1000型核电站二回路给水系统配置的优缺、点，为三代核电站的自主设计建造提供参考。

关键词: AP1000压水堆, M310压水堆, 二回路给水系统, 给水泵, 比较分析

Abstract: Taking the feed water systems in secondary loop of third generation AP1000 PWR and improved M310 PWR nuclear power plants as example, the configuration of the adjustment valve sets for feed water pump and the configuration of the main feed water pumps were compared. The advantages and disadvantages of the configuration of feed water system in secondary loop of the AP1000 nuclear power station were analyzed, which provides reference for independent design and construction of third generation nuclear power station.

Key words: pressurized water reactor AP1000 (AP1000 PWR), pressurized water reactor M310 (M310 PWR), feedwater system in secondary loop, feed water pump, comparative analysis

成军;杨建军. AP1000与M310改进型压水堆二回路给水系统比较分析[J]. 华电技术, 2013, 35(4): 69-71.

CHENG Jun;YANG Jianjun. Comparative analysis on feedwater systems in secondary loop of pressurized water reactors AP1000 and improved M310[J]. Huadian Technology, 2013, 35(4): 69-71.

[1]	马仁婷. 全容量给水泵汽轮机保护系统可靠性分析及优化措施[J]. 华电技术, 2019, 41(10): 60-63.
[2]	杨小龙，于国强，史毅越，殳建军，胡尊民. 1000MW超超临界机组给水泵自动并泵逻辑设计及应用[J]. 华电技术, 2019, 41(10): 64-67.
[3]	于淑慧. 高背压供热改造中给水泵汽轮机控制方式研究[J]. 华电技术, 2019, 41(1): 64-66.
[4]	白蕾. 汽动给水泵在变工况下运行的经济性分析[J]. 华电技术, 2018, 40(4): 50-51.
[5]	孙国强. 给水泵汽轮机油系统故障原因分析及改进措施[J]. 华电技术, 2018, 40(11): 45-47.
[6]	郭雅峰1，刘春松2，王东川1. 乌达热电150MW供热机组电动给水泵变频改造分析[J]. 华电技术, 2018, 40(1): 19-21.
[7]	袁世通. 超(超)临界机组低负荷时MFT动作原因分析及优化策略[J]. 华电技术, 2017, 39(7): 48-51.
[8]	栾俊1，蒋建平1，高鹏2. 给水泵汽轮机高背压供热改造技术研究及应用[J]. 华电技术, 2017, 39(3): 16-18.
[9]	余丽萍. 大型火电站给水泵组的配置与布置分析[J]. 华电技术, 2017, 39(12): 4-7.
[10]	陈树科，薛森贤，任绍军. 600MW超临界机组纯汽动给水泵启动方式探讨[J]. 华电技术, 2017, 39(1): 40-42.
[11]	赵超1，朱妍2. 给水泵汽轮机调节阀阀座现场更换工艺的创新与应用[J]. 华电技术, 2017, 39(1): 43-44.
[12]	王平波. 300MW机组无电动给水泵运行方案[J]. 华电技术, 2015, 37(6): 52-53.
[13]	代志纲1,李长松2. SSS 盘车装置在给水泵汽轮机上的应用与调试[J]. 华电技术, 2015, 37(5): 37-39.
[14]	洪立，王晓文. 给水泵密封水回水多级水封装置改造[J]. 华电技术, 2015, 37(3): 31-33.
[15]	刘文会. Ｇ６．６－０．７８型锅炉给水泵汽轮机缸体疏水优化[J]. 华电技术, 2015, 37(12): 44-44.