发电机氢冷器端盖法兰漏氢原因分析及对策

华电技术 ›› 2014, Vol. 36 ›› Issue (3): 40-40.

发电机氢冷器端盖法兰漏氢原因分析及对策

(湖南华电长沙发电有限公司，长沙〓410203)

出版日期:2014-03-25

Analysis on reason of hydrogen leakage in end cover flange of generator hydrogen cooler

(Hunan Huadian Changsha Power Generation Company Limited, Changsha 410203, China)

Published:2014-03-25

摘要/Abstract

摘要： 摘要：某电厂600MW氢冷发电机组的氢冷器端盖法兰多次漏氢，造成机组被迫紧急停运。通过分析确认漏氢原因为密封垫破损，采取优化运行规程、将氢冷器冷却水管更换为不锈钢金属软管、改进发电机氢冷器进/出口冷却水管道支撑等措施后，解决了发电机氢冷器端盖法兰漏氢的问题。

关键词: 关键词：发电机, 氢冷器, 端盖法兰, 冷却水管, 振动, 漏氢, 不锈钢金属软管

Abstract: Abstract:The hydrogen leakage fault in the hydrogen cooler end flange of the 600MW hydrogencooled generator in a power plant occurred repeatedly, which caused the compelled emergency shutdown of the unit. It was determined by analysis that the reason of the hydrogen leakage fault is breakage of the sealing gasket. The measures, such as to optimize the operating standard, to replace the cooling water tube of the hydrogen cooler by stainless steel flexible pipe, to improve the support of the inlet/outlet cooling water pipes of the generator hydrogen cooler and so on, were adopted, and the hydrogen leakage fault of the generator hydrogen cooler end flange was eliminated.

Key words: Keywords:generator, hydrogen cooler, end cover flange, cooling water pipe, vibration, hydrogen leakage, stainless steel flexible pipe

隋陆毅. 发电机氢冷器端盖法兰漏氢原因分析及对策[J]. 华电技术, 2014, 36(3): 40-40.

SUI Luyi. Analysis on reason of hydrogen leakage in end cover flange of generator hydrogen cooler[J]. Huadian Technology, 2014, 36(3): 40-40.

[1]	程学庆,施佳赟. 某核电站主给水前置泵振动超标治理[J]. 华电技术, 2020, 42(5): 83-88.
[2]	陈浩，徐军锋. 600MW超临界机组配汽特性对轴系振动的影响[J]. 华电技术, 2019, 41(9): 29-32.
[3]	陆定康，周伟. 工业水泵振动异常分析和处理[J]. 华电技术, 2019, 41(8): 78-80.
[4]	陈啸，徐威，刘利，陈鑫. 某600MW机组汽轮机异常振动的分析及处理[J]. 华电技术, 2019, 41(7): 64-66.
[5]	吴昌浩，曹景芳. 低速钢球磨煤机减速机齿轮断齿故障诊断及分析[J]. 华电技术, 2019, 41(5): 69-72.
[6]	周兴宏. GE PG9171E重型燃机轴振超限的原因及处理[J]. 华电技术, 2019, 41(5): 76-77.
[7]	冯坤. 1000 MW超超临界机组发电机调试期间振动问题的分析及处理[J]. 华电技术, 2019, 41(12): 41-45.
[8]	徐要伟1，朱晨1，张文科2. 水电站泄洪闸弧形工作闸门原型观测试验[J]. 华电技术, 2019, 41(12): 46-49.
[9]	刘强. 汽轮机安全监视系统设备存在的问题及防范措施[J]. 华电技术, 2018, 40(9): 30-31.
[10]	陈杰，赵卫正. 600MW机组通流改造后振动故障诊断及处理[J]. 华电技术, 2018, 40(9): 40-43.
[11]	王博磊，曹伟，牟法海，昃刚，巩振泉. 热电联产汽轮发电机组振动异常原因分析与处理[J]. 华电技术, 2018, 40(8): 42-43.
[12]	汪小峰1，陈锐2. 某电厂主蒸汽管道振动原因分析及治理[J]. 华电技术, 2018, 40(7): 32-34.
[13]	安宗武1，孟颖琪1，刘超1，李长海1，吴忠胜2. 新型350MW超临界供热机组调试期间故障分析及处理[J]. 华电技术, 2018, 40(7): 50-53.
[14]	孙海元. 某电厂330MW汽轮机冷态启动用时过长原因分析及处理[J]. 华电技术, 2018, 40(7): 54-55.
[15]	卜峥嵘1，程勇明2，安付立2，刘宾2. 高温高压蒸汽管道振动分析治理[J]. 华电技术, 2018, 40(5): 41-44.