1000MW汽轮机润滑油压力低的原因分析及处理

华电技术 ›› 2015, Vol. 37 ›› Issue (2): 59-60.

1000MW汽轮机润滑油压力低的原因分析及处理

(华电宁夏灵武发电有限公司，银川〓750400)

出版日期:2015-02-25 发布日期:2015-04-02

Analysis on reasons of lower lubricating oil pressure of 1000MW steam turbine and treatment

(Huadian Ningxia Lingwu Power Generation Company Limited, Yinchuan 750400, China)

Online:2015-02-25 Published:2015-04-02

摘要/Abstract

摘要： 摘要：某电厂1000MW机组启动过程中，汽轮机冲转至3000r/min时润滑油压力偏低，交流润滑油泵、启动油泵电流偏大。机组重新停运后进入汽轮机润滑油箱检查，发现主油泵出口至油涡轮增压泵入口管道堵头掉落，造成润滑油系统油涡轮增压泵出力不足。将堵头重新安装并固定后，机组启动汽轮机冲转至3000r/min时，润滑油系统各项参数正常。

关键词: 关键词：1000MW汽轮机, 润滑油系统, 压力, 主油泵, 油涡轮增压泵, 堵头

Abstract: Abstract:In startup process of the 1000MW unit of a power plant, when the rotate speed of the turbine increased to 3000r/min, the lubricating oil pressure became lower, and the currents of the AC lubricating oil pump and the startup oil pump became larger. The unit was shut down for inspection. It was found by inspection inside the lubricating oil box that the plug of the inlet pipe of the oil turbine booster pump from the main oil pump outlet fell out, which caused the output of the oil turbine booster pump of the lubricating oil system to be insufficient. The plug was reinstalled and fixed, and the fault was eliminated.

Key words: Keywords:1000MW steam turbine, lubricating oil system, pressure, main oil pump, turbine booster oil pump, plug

王海波. 1000MW汽轮机润滑油压力低的原因分析及处理[J]. 华电技术, 2015, 37(2): 59-60.

WANG Haibo. Analysis on reasons of lower lubricating oil pressure of 1000MW steam turbine and treatment[J]. Huadian Technology, 2015, 37(2): 59-60.

[1]	刘志敏1，2，丁阳1，徐婷婷1，白云山1. 燃气轮机燃烧压力脉动与测量关键技术研究 [J]. 华电技术, 2019, 41(9): 1-5.
[2]	宋馨. 汽轮机轴封蒸汽温度波动原因分析与解决方案[J]. 华电技术, 2019, 41(2): 46-48.
[3]	王亮茗. 9FA燃机透平排气分散度高的原因分析及预防对策[J]. 华电技术, 2019, 41(1): 50-54.
[4]	于淑慧. 高背压供热改造中给水泵汽轮机控制方式研究[J]. 华电技术, 2019, 41(1): 64-66.
[5]	莫布林. 锅炉炉膛压力保护系统改造[J]. 华电技术, 2018, 40(7): 29-31.
[6]	柯昭，郝翰，王钢. 超超临界机组PCV阀控制系统优化策略[J]. 华电技术, 2018, 40(6): 56-57.
[7]	吴鑫杰. null[J]. 华电技术, 2018, 40(4): 54-55.
[8]	黄友昌. 火电工程建设中质监站锅炉压力容器的安全监督[J]. 华电技术, 2018, 40(11): 40-41.
[9]	朱达. 变压器压力释放阀在线试验初探[J]. 华电技术, 2018, 40(1): 42-43.
[10]	杨大锚. 变PID参数法在电厂自动发电控制中的应用[J]. 华电技术, 2017, 39(8): 6-9.
[11]	聂义平1，程亮2. 燃气轮机交流辅助润滑油泵的逻辑优化[J]. 华电技术, 2017, 39(2): 51-52.
[12]	王予川1，杨智峰2. 热网加热器的安全运行措施[J]. 华电技术, 2017, 39(12): 44-45.
[13]	万月英，黄佩兵，胡丽娟. 压力钢管组合钢衬垫单面对接焊工艺[J]. 华电技术, 2016, 38(9): 55-55.
[14]	杨春国，陈博. 水电站洞内高竖井压力钢管安装安全管理简析[J]. 华电技术, 2016, 38(6): 34-37.
[15]	李敏. 多热源供热系统热源平衡分配技术及应用[J]. 华电技术, 2016, 38(6): 49-50.