孟加拉Bibiyana电站燃气-蒸汽联合循环机组吹管过程分析

华电技术 ›› 2016, Vol. 38 ›› Issue (10): 28-30.

孟加拉Bibiyana电站燃气-蒸汽联合循环机组吹管过程分析

1.东北电力科学研究院，沈阳 110006； 2.辽宁东科电力有限公司，沈阳 110179

出版日期:2016-10-25

Bangladesh Bibiyana Power Station gas steam combined cycle pipe blowing process analysis

1. Northeastern Electric Power Research Institute, Shenyang 110006, China; 2. Liaoning Dongke Power Company Limited, Shenyang 110179, China

Published:2016-10-25

摘要/Abstract

摘要：

摘要：余热锅炉首次启动进行吹管前，通过调整燃汽轮机的进口可转导叶(IGV)角度，来达到余热锅炉设计中首次启动要求的最低温度370℃。此次吹管气源为余热锅炉自产蒸汽，采用稳、降压联合的吹扫方式对锅炉的过热器、再热器以及高、中、低压蒸汽系统管道进行吹扫。介绍了具体的吹管方案、吹管过程及吹管过程中发生的问题。

关键词: 关键词：联合循环, 排气温度, IGV角度, 吹管

Abstract:

Abstract:Before the first start and first pipe blowing of waste heat boiler, by adjusting the angle of inlet guide vane (IGV) of gas turbine, the boiler temperature archived 370℃. The air source for pipe blowing was steam produced by boiler itself. Stablereduce pressure combined procedure was implemented on boiler overheater, reheater and high, middle and low pressure steam pipeline. This paper specifically introduced the pipe blowing plan, process and problems.

Key words: Keywords:combined cycle, exhaust gas temperature, IGV angle, blowpipe

马成久1，李朋2，王国锋2. 孟加拉Bibiyana电站燃气-蒸汽联合循环机组吹管过程分析[J]. 华电技术, 2016, 38(10): 28-30.

MA Chengjiu1, LI Peng2, WANG Guofeng2. Bangladesh Bibiyana Power Station gas steam combined cycle pipe blowing process analysis[J]. Huadian Technology, 2016, 38(10): 28-30.

[1]	王林，王红雨，张亚夫，高景辉，孟颖琪. 燃气-蒸汽联合循环余热锅炉吹管工艺及优化[J]. 华电技术, 2018, 40(6): 73-76.
[2]	颜喜，张庆国，王永佳，肖冠华. 9F级475MW燃气轮机三汽包余热锅炉吹管技术应用 [J]. 华电技术, 2017, 39(3): 55-56.
[3]	李书才，魏静，张力. 联合循环机组不设启动锅炉的可行性分析及应用实践[J]. 华电技术, 2016, 38(12): 25-27.
[4]	吴志伟. 降低锅炉吹管成本的补水方式[J]. 华电技术, 2014, 36(6): 52-53.
[5]	李春建;段小云. 亚临界热电联产机组吹管关键技术分析[J]. 华电技术, 2012, 34(9): 41-44.
[6]	毛华军. 燃气轮机排气温度监视和保护功能分析[J]. 华电技术, 2009, 31(8): 11-15.