大型储能电站智能辅助调试系统的设计及应用

华电技术 ›› 2019, Vol. 41 ›› Issue (11): 53-56.

大型储能电站智能辅助调试系统的设计及应用

长园深瑞继保自动化有限公司，南京〓211100

出版日期:2019-11-25 发布日期:2019-12-18

Design and application of intelligent auxiliary debugging system for largescale energy storage power station

CYG Sunri Company Limited，Nanjing 211100，China

Online:2019-11-25 Published:2019-12-18

摘要/Abstract

摘要：

大型储能电站信息测点数量达百万级，采用传统人工校核方法进行对点联调时间较长，为此提出了一种智能辅助调试系统，可实现全站设备自动对点。辅助调试系统通过智能电子设备(IED)仿真工具导入全站变电站配置描述(SCD)模型文件，然后向监控后台、远动机发送报文，形成记录文件；监控后台收到报文后进行解析比对，形成记录文件，远动机收到报文后向模拟主站转发报文，模拟主站解析后也形成记录文件；最后，智能辅助调试系统将多份记录文件进行一致性比较，出具调试结果报告。工程实践表明，该系统使用后可极大降低调试的工作量，缩短项目建设周期。

关键词:

font-size: 10.5pt, mso-spacerun: 'yes', mso-font-kerning: 1.0000pt">大型储能电站, 信号联调, 智能辅助调试系统, 自动对点, 变电站配置描述文件

Abstract:

The number of information measuring points of a largescale energy storage power station is more than one million, and the traditional manual checking method for counteringpoint joint debugging is timeconsuming. An intelligent auxiliary debugging system is proposed to realize automatic counteringpoint process for the equipment in the whole plant. SCD model files of the whole plant are imported into the the auxiliary debugging system by intelligent electronic device(IED)simulation tool, and message is sent to the monitoring background and the telecontrol device. The monitoring background receives , parses and compares the message and forms a recording file.The telecontrol device receives the message and forwards it to the control center who parses the massage and forms a recording file as well. Finally, the intelligent auxiliary debugging system will compare the consistency of the recorded files, and issue a debugging report. Engineering practice shows that the system can greatly reduce the workload of personnel in debugging and shorten the time of project construction.

Key words:

font-size: 10.5pt, mso-spacerun: 'yes', mso-font-kerning: 1.0000pt">largefont-size: 10.5pt, mso-spacerun: 'yes', mso-font-kerning: 1.0000pt">font-size: 10.5pt, mso-spacerun: 'yes', mso-font-kerning: 1.0000pt">scale energy storage power station, signal joint debugging, intelligent auxiliary debugging system, automatic countering point, substation configuration description

赵龙，岳义博. 大型储能电站智能辅助调试系统的设计及应用[J]. 华电技术, 2019, 41(11): 53-56.

ZHAO Long,YUE Yibo.

Design and application of intelligent auxiliary debugging system for largescale energy storage power station [J]. Huadian Technology, 2019, 41(11): 53-56.

[1]	陈宏岩，唐治国，陈琦，王永旭，吴路明. 基于区间潮流算法的低压配电网分散无功补偿优化方法[J]. 华电技术, 2020, 42(6): 1-5.
[2]	王利杰，王鸿腾，孙波. 基于稳定性试验数据的水轮发电机组运行区域划分[J]. 华电技术, 2020, 42(6): 6-9.
[3]	吴路明，薛明军，陈琦，王永旭，唐治国，陈宏岩. 一起电子互感器异常引发的复杂发展性故障分析及改进[J]. 华电技术, 2020, 42(6): 10-15.
[4]	牛犇. 以软化水为水源的循环冷却水水质控制技术[J]. 华电技术, 2020, 42(6): 16-21.
[5]	尚力阳，范素香，张智勇，于鹏辉，何勇，季艳茹. 输水干渠智能化拦藻设备设计及应用[J]. 华电技术, 2020, 42(6): 22-24.
[6]	王云鹏，段小云. 330MW热电联产机组锅炉低氮燃烧器改造和燃烧调整[J]. 华电技术, 2020, 42(6): 35-42.
[7]	邵磊，潘广强，张裕全，储昊，曹伟. 声波解堵提效技术在尿素热解炉上的应用[J]. 华电技术, 2020, 42(6): 43-46.
[8]	王志永，许贺，朱慧敏，葛俊沛，许静. 燃气-蒸汽联合循环机组余热锅炉热效率计算模型对比分析[J]. 华电技术, 2020, 42(6): 47-51.
[9]	王东振，葛磊蛟. 面向燃气发电机组出口电缆同相多根并联运行优化策略[J]. 华电技术, 2020, 42(6): 52-56.
[10]	高涌，田鑫，吴寅琛. 燃气轮机空气过滤系统预过滤器改造效果评估[J]. 华电技术, 2020, 42(6): 57-61.
[11]	行武，郭晓，王哲，史博伦. 参数识别原理在磁控型并联电抗器保护中的应用[J]. 华电技术, 2020, 42(6): 47-51.
[12]	尤佳，王润芳，马大卫，姜少毅，朱仁斌，陈剑，王克峰. 基于合肥市PM2.5源解析的电能替代效果评估[J]. 华电技术, 2020, 42(1): 1-7.
[13]	高正来1，周国山1，沈东1，潘正琪1，周威1，信晓颖2，李艳2. 湿式电除尘器与氨法脱硫协同脱除多种污染物效果研究[J]. 华电技术, 2020, 42(1): 25-28.
[14]	刘志敏1，2，丁阳1，徐婷婷1，白云山1. 燃气轮机燃烧压力脉动与测量关键技术研究 [J]. 华电技术, 2019, 41(9): 1-5.
[15]	熊远南1，汪永威1，陈英武2. 电除尘器进口烟箱结构设计对气流分布的影响及数值模拟优化[J]. 华电技术, 2019, 41(9): 6-11.