电厂输煤胶带机部件选型裕度的分析

华电技术 ›› 2012, Vol. 34 ›› Issue (12): 64-64.

电厂输煤胶带机部件选型裕度的分析

刘天军，王立波

华电重工股份有限公司，北京100077

收稿日期:1900-01-01 修回日期:1900-01-01 出版日期:2012-12-25

Analysis on safety margin for selection of components of belt coal conveyer in power plant

LIU Tianjun, WANG Libo

Huadian Heavy Industries Company Limited, Beijing 100077, China

Received:1900-01-01 Revised:1900-01-01 Published:2012-12-25

摘要/Abstract

摘要： 根据近年来火力发电厂输煤胶带机的应用情况，结合多个电厂胶带机的运行数据和破损情况，对部件选型的匹配性进行了理论分析，就胶带机驱动功率的选择和胶带选型给出了建议，供设计时参考。

关键词: 输煤胶带机, 选型裕度, 理论分析, 胶带机驱动功率, 胶带

Abstract: According to the application situation of the belt coal conveyer in power plants for the past few years, combining with the operation data of the belt coal conveyers of multiple power plants and the damage of the conveyers, the matching attribute of the component type selection was analyzed theoretically. Some suggestions about the selection of belt type and the driving power of the belt conveyer were given, which provide reference for belt coal conveyer design.

Key words: belt coal conveyer, safety margin for type selection, theoretical analysis, driving power of belt conveyer, belt

刘天军;王立波. 电厂输煤胶带机部件选型裕度的分析[J]. 华电技术, 2012, 34(12): 64-64.

LIU Tianjun;WANG Libo. Analysis on safety margin for selection of components of belt coal conveyer in power plant[J]. Huadian Technology, 2012, 34(12): 64-64.

[1]	刘修占，闫新安. -31°大倾角下运带式输送机的成功应用[J]. 华电技术, 2017, 39(11): 43-45.
[2]	杨彩霞. 管状皮带机胶带改型分析[J]. 华电技术, 2015, 37(7): 55-56.
[3]	岳新喜. 圆管带式输送机直线段及曲线段运行阻力计算[J]. 华电技术, 2014, 36(9): 19-20.
[4]	戴军 1，刘光耀 2，徐婷婷 2，严俊杰 2. 供热机组热电比影响因素研究[J]. 华电技术, 2013, 35(12): 7-10.
[5]	王晓斌. 带式输送机胶带跑偏力学分析及处理方法[J]. 华电技术, 2012, 34(2): 55-58.
[6]	谢武杰. 改善犁式卸料器对输送带磨损的措施[J]. 华电技术, 2011, 33(12): 54-55.
[7]	宋强. 倾斜带式输送机拐角处胶带变形解决方案[J]. 华电技术, 2010, 32(9): 57-58.
[8]	孙江;齐向东. 基于PLC模糊控制调速系统的研究[J]. 华电技术, 2009, 31(8): 22-25.
[9]	王学平;王波;刁志文;毛吉贵;曹文启. 某110kV线路动、静态增容分析[J]. 华电技术, 2009, 31(8): 65-68.