电厂运行过程中支吊架偏装量调整

华电技术 ›› 2014, Vol. 36 ›› Issue (7): 24-25.

电厂运行过程中支吊架偏装量调整

(1.浙江省火电建设公司，杭州〓310016；2.河南华电金源管道有限公司，郑州〓450051)

出版日期:2014-07-25

Adjustment of installation offset value of supports in operation process of power plant

(1.Zhejiang Thermal Power Construction Company, Hangzhou 310016, China; 2.Henan Huadian Jinyuan Pipeline Company Limited, Zhengzhou 450051, China)

Published:2014-07-25

摘要/Abstract

摘要： 摘要：分析了某电厂运行过程中高压旁路减温水支吊架损坏的原因，通过安装有效的临时支吊架、重新设计安装新支吊架等措施，有效解决了运行过程中弹簧支吊架偏装量调整问题，供处理同类问题时参考。

关键词: 关键词：支吊架, 高压旁路, 偏装量调整, 减温水

Abstract: Abstract:The reasons of damage of high pressure bypass attemperating water supports in operation process of a power plant were analyzed. The effective temporary supports were installed, and then new supports were redesigned and installed. The problem of adjustment of installation offset value of the spring supports in operation process was solved effectively, which provides reference for handling with similar problems.

Key words: Keywords:support, high pressure bypass, adjustment of installation offset value, attemperating water

陈春辉 1，潘建航 1，张丰收 2 . 电厂运行过程中支吊架偏装量调整[J]. 华电技术, 2014, 36(7): 24-25.

CHEN Chunhui 1, PAN Jianhang 1, ZHANG Fengshou 2 . Adjustment of installation offset value of supports in operation process of power plant [J]. Huadian Technology, 2014, 36(7): 24-25.

[1]	张俊伟. NG-M701F-R型余热锅炉高压过热器爆管原因分析及解决办法[J]. 华电技术, 2019, 41(7): 46-49.
[2]	刘忠轩，宁新宇，王亚顺，程石，郑敏聪. 电站锅炉褐煤掺烧现状及其影响研究分析[J]. 华电技术, 2019, 41(1): 77-79.
[3]	刘海，侯本杰，杨峰. 电站锅炉减温水质量流量特性分析[J]. 华电技术, 2017, 39(5): 20-23.
[4]	王东辉. 过热器减温水改造的经济性及可行性分析[J]. 华电技术, 2017, 39(3): 44-46.
[5]	魏道君，王志荣. 1000MW机组再热器减温水调节阀内漏治理及调节线性优化改造[J]. 华电技术, 2017, 39(3): 39-41.
[6]	熊显巍，陶丽. ６００ＭＷ亚临界Ｗ火焰锅炉热力性能分析及改造[J]. 华电技术, 2016, 38(3): 1-5.
[7]	白斌杰. M701F机组高压旁路调门不能关闭的原因分析[J]. 华电技术, 2012, 34(12): 51-53.
[8]	柏冰;舒茂龙;卢艳东;王淑红;余长军;田洪志. 百万千瓦级核电机组和火电机组的主蒸汽超压保护装置比较[J]. 华电技术, 2012, 34(11): 41-44.
[9]	王晓鹏;岳银福;冯勇;田红卫. 某电站锅炉炉膛卫燃带的一次技术改造[J]. 华电技术, 2011, 33(1): 55-56.
[10]	李飚;代静轶. 300MW机组减温水量调整分析[J]. 华电技术, 2010, 32(S1): 29-30.
[11]	曹定华;刘栓联. 滑压曲线存在的问题及解决方法[J]. 华电技术, 2010, 32(3): 11-12.