核电旋转电机管路磷化处理技术研究

华电技术 ›› 2015, Vol. 37 ›› Issue (2): 9-12.

核电旋转电机管路磷化处理技术研究

(华电电力科学研究院，杭州〓310030)

出版日期:2015-02-25 发布日期:2015-04-02

Research on phosphating technology for pipes of rotating electric machines in nuclear power station

(China Huadian Electric Research Institute, Hangzhou 310030, China)

Online:2015-02-25 Published:2015-04-02

摘要/Abstract

摘要： 摘要：根据核电旋转电机管路的防锈要求制订了详细的工艺流程，对实施过程中存在的过腐蚀、磷化膜不均以及磷化后返锈等问题进行了试验研究，得出了酸洗液的最佳配比和最佳磷化剂，解决了磷化后返锈的难题，可为此类产品的磷化处理提供参考。

关键词: 关键词：核电, 酸洗, 磷化, 磷化膜, 过腐蚀

Abstract: Abstract:According to the rust prevention requirement of the pipes of rotating electric machines in nuclear power stations, a detailed phosphating technology process was developed.The problems occurred in implement of the technology process, such as the overetching, the unevenness of phosphating film and the rerust after phosphorization, were researched experimentally, and the optimal proportion of the acid washing liquid and the best phosphorization agent were obtained. The problem of rerust after phosphorization was solved. The results in this paper provide reference for phosphating of similar equipments in nuclear power stations.

Key words: Keywords:nuclear power station, acid pickling, phosphorization, phosphating film, overetching

李戈. 核电旋转电机管路磷化处理技术研究[J]. 华电技术, 2015, 37(2): 9-12.

LI Ge. Research on phosphating technology for pipes of rotating electric machines in nuclear power station[J]. Huadian Technology, 2015, 37(2): 9-12.

[1]	高锦，杨薇. 超临界直流炉酸洗和酸洗废液处理技术分析[J]. 华电技术, 2019, 41(3): 49-52.
[2]	王磊，王增琛，程超，黄文强. 管道弯管工艺在核电站的应用分析[J]. 华电技术, 2015, 37(9): 75-76.
[3]	张敏，富财文，张洪洋，李萌. ＡＰ１０００核电站后装式重型屏蔽门吊装就位技术[J]. 华电技术, 2015, 37(11): 72-75.
[4]	张军承. 核电机组测功法甩负荷试验研究[J]. 华电技术, 2014, 36(7): 4-9.
[5]	李良浩，李岩龙，刘炳伟. 核电站氢气供应方案选择[J]. 华电技术, 2014, 36(6): 20-21.
[6]	宋明强，周涛，方晓璐. 中国核电知识产权存在的问题及解决途径[J]. 华电技术, 2014, 36(12): 78-80.
[7]	刘东勇，商永强. 福清核电站 #1机组二回路水压试验水质要求与处理[J]. 华电技术, 2014, 36(10): 8-10.
[8]	宋明强，周涛，琚忠云，李精精. 中国内陆核电发展可行性及时机研究[J]. 华电技术, 2013, 35(12): 1-3.
[9]	徐国泉. 酸洗废水污染冷却水的原因分析及预防[J]. 华电技术, 2012, 34(6): 63-64.
[10]	郑春华;原锦梅;吴涛. 200MW汽轮机凝汽器端差升高的原因分析及处理对策[J]. 华电技术, 2012, 34(3): 10-11.