Analysis of closing faults of butterfly valves and treatment method

Huadian Technology ›› 2010, Vol. 32 ›› Issue (2): 54-56.

• 技术交流 • Previous Articles Next Articles

Analysis of closing faults of butterfly valves and treatment method

LIN Chengfa, SU Yijian

Mindong Hydropower Development Corporation Limited, Ningde 352100, China)

Received:1900-01-01 Revised:1900-01-01 Published:2010-02-25

Abstract

Abstract: In some hydropower stations in which the butterfly valves are closed by themselves using heavy punch, the butterfly valves often can not closed fully after operating several years. The problem was analyzed, and a reliable automatic closing procedure of butterfly valve was proposed. The procedure can not only ensure normal closing of butterfly valve and provide safety guarantee for operation and overhaul of hydropower station, but also can protect the main shaft and bearing of butterfly valve and lengthen the service time of butterfly valve.

Key words: butterfly valve, closing fault, reason analysis, treatment method

LIN Chengfa;SU Yijian. Analysis of closing faults of butterfly valves and treatment method[J]. Huadian Technology, 2010, 32(2): 54-56.

[1]	LI Ge1, ZHU Haibao1, WANG Jun2. Reason analysis and prevention of the burnout of boiler burner nozzle [J]. Huadian Technology, 2018, 40(2): 21-24.
[2]	ZHANG Xuehai. On line replacement of valve servo valve and the analysis of the servo valve jam of 600MW steam turbine [J]. Huadian Technology, 2016, 38(2): 35-38.
[3]	PENG Jun. Analysis and processing on fault reason of pneumatic brake system of hydropower unit No.1 in Huanglongtan Hydropower Plant [J]. Huadian Technology, 2015, 37(2): 42-43.
[4]	LI Jianshan1, LI Lihua2，LI Huabing3. Analysis on startup fault of butterfly valve oil pump of hydropower station and treatment [J]. Huadian Technology, 2015, 37(2): 48-49.
[5]	ZHENG Jianfeng. Analysis on reasons of higher temperature of bearing bush of horizontal shaft mixed flow water turbinegenerator unit and treatment scheme [J]. Huadian Technology, 2015, 37(1): 34-36.
[6]	FENG Yufeng. Analysis on reasons of fracture failure of main shaft of bucketwheel stackerreclaimer [J]. Huadian Technology, 2014, 36(9): 37-39.
[7]	LI Qiufeng, LIU Shuwei. Function perfecting of distributed control system of 600MW unit [J]. Huadian Technology, 2014, 36(8): 14-16.
[8]	LI Changsong 1, TANG Guangtong 1, NAN Weiliang 1, LIU Yongping 2, WANG Zhe 1 . (1.Hebei Electric Power Corporation Electric Power Research Institute, Shijiazhuang 050021, China; 2.Hebei Electric Power Construction First Engineering Company，Shijiazhuang 050025, China) [J]. Huadian Technology, 2014, 36(4): 41-44.
[9]	WU Fan. Analysis on reasons caused tripping of generator reverse power protection of S109FA combined cycle unit [J]. Huadian Technology, 2014, 36(4): 57-60.
[10]	HAN Lizheng. Analysis on reasons of outoflimit vibration of water intake pump [J]. Huadian Technology, 2014, 36(11): 55-57.
[11]	YANG Feiping 1，YANG Zhu 1，TANG Zhenhua 2 . Solving scheme of water wall cracking for 600MW supercritical Wshaped flame boiler [J]. Huadian Technology, 2014, 36(1): 33-35.
[12]	XU Gang. Analysis on reason of damage of clamping bolt passing through core of generator stator and treatment method [J]. Huadian Technology, 2014, 36(1): 58-59.
[13]	JIANG Anwei. Analysis on reasons of maloperation of 500kV line sweitch and precontrol measures [J]. Huadian Technology, 2014, 36(1): 63-65.
[14]	HAN Xianghu. Analysis on reasons of switch tripping caused by interrupt of 110V DC power source [J]. Huadian Technology, 2013, 35(9): 1-3.
[15]	BU Fanwei, NI Jianmin. Analysis on reasons of fault of compensation capacitor in 6kV ungrounded system [J]. Huadian Technology, 2013, 35(9): 7-8.

Analysis of closing faults of butterfly valves and treatment method

Knowledge

Abstract

Cite this article

share this article

References

Related Articles 15

Recommended Articles

Metrics

Comments