Optimization of reheat temperature control strategy for 630MW supercritical unit

Abstract

Abstract: In the reheat temperature control of the 630MW unit of Guoxin Yangzhou Power Generation Corporation Limited, there was large time delay, nonlinear and drastic disturbance for the controlled object. Using the state variable method, the fuzzy control technique and the intelligent feedforward compensation technique comprehensively, the reheat temperature control strategy was optimized, and the better effects were obtained in practical operation. 

Key words: reheat temperature, supercritical unit, large time delay object, state variables, fuzzy control, intelligent feedforward

SHANG Jun;SHI Gang. Optimization of reheat temperature control strategy for 630MW supercritical unit[J]. Huadian Technology, 2010, 32(6): 1-3.

[1]	CHEN Yang, WENG Weijie, HUANG Jiangdong, ZOU Tao, JIANG Wei. Research on multi-path balancing topology based on transformers [J]. Integrated Intelligent Energy, 2024, 46(4): 68-77.
[2]	SUN Na, DONG Haiying, CHEN Wei, MA Hulin. Secondary frequency modulation control strategy for large-scale grid-side energy storage devices in new power systems [J]. Integrated Intelligent Energy, 2024, 46(2): 59-67.
[3]	SUN Haifeng, WANG Zhaohui, WANG Jianfeng, HU Da, ZHU Yue. Analysis on safety and reliability of 600 MW supercritical units' deep peak regulation [J]. Huadian Technology, 2020, 42(12): 94-100.
[4]	CHEN Shuilin1，ZHANG Xiaolei2，WU Shun1. Analysis and optimization test for 660MW supercritical unit under slidingpressure operation [J]. Huadian Technology, 2019, 41(4): 6-9.
[5]	ZHANG Tianhai1，YU Guoqiang1，SHU Jianjun1，TANG Keyi1，ZHU Yongjiu2. Research on control strategy of highpressure heater system for ultrasupercritical secondary reheat unit [J]. Huadian Technology, 2019, 41(3): 35-39.
[6]	HOU Xiaoning1，Abu Dhabi Krimu·ABU DHATI2. Application analysis on high back pressure heating technology for supercritical intercooling unit [J]. Huadian Technology, 2019, 41(2): 36-38.
[7]	LIU Bin，SHAO Changnuan. Application of adjacent boiler heating startup technology for 1000MW ultrasupercritical units [J]. Huadian Technology, 2019, 41(1): 74-76.
[8]	NI Xinyu1, MAO Dajun2. Research on fault diagnosis technology of supercritical unit based on data fusion [J]. Huadian Technology, 2018, 40(7): 5-9.
[9]	HAN Rongli, FENG Renhai. Exploration and practice of 660MW ultrasupercritical units operating in 620℃ reheating steam [J]. Huadian Technology, 2018, 40(7): 18-21.
[10]	CUI Xiaoguang. Reason analysis and countermeasures of ash sloughing in 1000MW doublereheat tower type boiler [J]. Huadian Technology, 2018, 40(7): 56-58.
[11]	KE Zhao，HAO Han，WANG Gang. Optimization strategy of PCV valve control system for supercritical unit [J]. Huadian Technology, 2018, 40(6): 56-57.
[12]	TENG Shuhui. Analysis of invalid lowtemperature reheater of supercritical unit [J]. Huadian Technology, 2018, 40(4): 36-39.
[13]	WANG Jianghong, YE Wenhua. The problems and countermeasures of startup of 600MW supercritical coalfired power unit with steam feed pump [J]. Huadian Technology, 2018, 40(2): 38-39.
[14]	WEI Dong. Application analysis of backwash method for lowlow temperature economizer of supercritical unit [J]. Huadian Technology, 2018, 40(2): 40-42.
[15]	WU Xiaohui. 600MW supercritical unit water consumption reduction reconstruction practice [J]. Huadian Technology, 2017, 39(4): 60-62.

Optimization of reheat temperature control strategy for 630MW supercritical unit

Knowledge

Abstract

Cite this article

share this article

References

Related Articles 15

Recommended Articles

Metrics

Comments