Problems occurred during commissioning of 660 MW Heller indirect air cooling unit and treatment measures

Huadian Technology ›› 2013, Vol. 35 ›› Issue (1): 38-41.

• 技术交流 • Previous Articles Next Articles

Problems occurred during commissioning of 660 MW Heller indirect air cooling unit and treatment measures

DONG Lin1, ZENG Yajie2, MA Yong3

1.Northwest Electric Power Construction and Commissioning Institute, Xi’an 710032, China; 2.Hubei Electric Power Construction First Engineering Company, Wuhan 430000, China; 3.Xi’an Thermal Power Research Institute Company Limited, Xi’an 710032, China

Received:1900-01-01 Revised:1900-01-01 Online:2013-01-25 Published:2013-01-25

Abstract

Abstract: In the commissioning process of the 660MW Heller indirect air cooling thermal power unit, the conditions of air cooling system control logic and the water film of circulating water were deteriorated, and an accident of the rupture membrane breakdown in low pressure cylinder occurred without sufficient operation experiences. The accidents were analyzed. The efficient measures were adopted, and the faults were treated.

Key words: Heller indirect air cooling system, hydraulic turbine, vacuum reducing rapidly, water film, reformation of condenser

DONG Lin;ZENG Yajie;MA Yong. Problems occurred during commissioning of 660 MW Heller indirect air cooling unit and treatment measures[J]. Huadian Technology, 2013, 35(1): 38-41.

[1]	WANG Lijie，WANG Hongteng，SUN Bo. Operation region partition for hydraulic turbine generator units based on stability test data [J]. Huadian Technology, 2020, 42(6): 6-9.
[2]	. Analysis and experimental study on factors affecting power generation by river current [J]. Huadian Technology, 2020, 42(2): 76-80.
[3]	YANG Zhinan. The analysis and processing of signal such as V/F limitation in the starting process of a hydroelectric unit [J]. Huadian Technology, 2018, 40(4): 34-35.
[4]	LIU Jiawen. Analysis and treatment of cracks on hydraulic turbine runner [J]. Huadian Technology, 2015, 37(3): 54-55.
[5]	TIAN Lun. Operation practice of hydraulic turbine governor power mode in Suofengying Hydropower Plant [J]. Huadian Technology, 2014, 36(8): 52-54.
[6]	LIAO Jiajun;FAN Yu;WANG Xing. Simulation analysis on setup of vents for magneticlevitation bearing device of hydraulic turbinegenerator unit and its affect [J]. Huadian Technology, 2012, 34(9): 10-13.
[7]	GUO Shitian. Analysis and treatment of the overtemperature of hydraulic turbine guide bearing [J]. Huadian Technology, 2011, 33(12): 24-27.
[8]	LIU Xiaoyun. Analysis of oil leakage of hydraulic turbine runner and reformation [J]. Huadian Technology, 2010, 32(3): 67-69.
[9]	LIANG Wei. Analysis of cracks in wheel blades of hydraulic turbine and strength enhancing [J]. Huadian Technology, 2010, 32(2): 63-66.
[10]	LEI Qinghua. Test and analysis of welding residual stress of interflow type hydraulic turbine runner [J]. Huadian Technology, 2009, 31(2): 7-10.
[11]	CHEN Wei. Treatment measures for frequently startup and stop of oil pump in hydraulic turbine governor [J]. Huadian Technology, 2009, 31(11): 45-46.
[12]	WANG Fang;CHEN Zili;WEI Zebing;HUANG Jianguo. 3D-FEM analysis of the spiral casing of hydraulic turbine [J]. Huadian Technology, 2008, 30(11): 13-16.

Problems occurred during commissioning of 660 MW Heller indirect air cooling unit and treatment measures

Knowledge

Cited

Abstract

Cite this article

share this article

References

Related Articles 12

Recommended Articles

Metrics

Comments