Analysis on elimination oil leakage fault of vacuum oil purifier by new centrifugal flash dehydration technology

Abstract

Abstract: Abstract:In the vacuum oil purifier, the bubbles occur easily and cause the oil leakage accident. The reasons of oil leakage accident were analyzed. The insufficient of the existing oil leakage preventing measures was expounded. The basic principle of the new centrifugal flash dehydration technology was described briefly. The experiment proved that by the new technology, the fast dehydration can be realized, the oil and the gas can be separated thoroughly, and the bubble problem of the vacuum oil purifier can be solved. So the oil leakage accident potential was eliminated.

Key words: Keywords:centrifugal flash dehydration, vacuum oil purifier, vacuum degree, bubble, oil leakage

ZHAO Zhixiang 1, WANG Wenbing 2 . Analysis on elimination oil leakage fault of vacuum oil purifier by new centrifugal flash dehydration technology[J]. Huadian Technology, 2014, 36(5): 21-22.

[1]	HE Changyu，ZHOU Lin，LI Zhaofeng. Analysis of fuelsaving efficiency after oil gun reformation of 300MW coalfired unit [J]. Huadian Technology, 2019, 41(5): 56-58.
[2]	WANG Min1，WANG Jie2. Cause analysis and treatment of low vacuum of condenser in 660MW supercritical unit [J]. Huadian Technology, 2019, 41(3): 59-61.
[3]	CHEN Li1，WU Chunchao2. Cause analysis and treatment of high moisture content of gypsum in 1050MW unit [J]. Huadian Technology, 2018, 40(5): 56-57.
[4]	WAN Zhiyong. Reason analysis on the abruptly dropping of vacuum degree in the process of vacuum pump switching and its countermeasures [J]. Huadian Technology, 2016, 38(5): 52-53.
[5]	LI Tao. The treatment scheme of oil leakage for contact seal of thrust external circulation pump [J]. Huadian Technology, 2016, 38(3): 64-65.
[6]	WANG Gang. Analysis on reasons of lowering of condenser vacuum degree and diagnosis method [J]. Huadian Technology, 2015, 37(3): 34-37.
[7]	CAO Ye. Analysis on reasons of decreasing of condenser vacuum degree and treatment [J]. Huadian Technology, 2014, 36(9): 49-50.
[8]	ZENG Junquan. Analysis on reasons of sealing oil leakage into generator and preventive measures [J]. Huadian Technology, 2013, 35(8): 49-51.
[9]	HUANG Wenyao 1, XIAO Tiehong 2 . Analysis on factors causing operation fault of turboset [J]. Huadian Technology, 2013, 35(8): 43-45.
[10]	HAN Qin;XU Xiaobin;CHANG Hao. Calculation and analysis of vacuum base value of thermal power unit for energyloss analysis [J]. Huadian Technology, 2013, 35(3): 16-19.
[11]	LI Tiejun. Problems existed in circulating water residual heat utilization system and improvement [J]. Huadian Technology, 2012, 34(8): 68-72.
[12]	QIU Jiayu. Analysis on reason causing amount of dissolved oxygen in condensed water to exceed standard and improvement [J]. Huadian Technology, 2012, 34(7): 54-55.
[13]	WEI Xiaobao. Method for increasing firsttime qualification rate of cement cushion fabrication [J]. Huadian Technology, 2011, 33(6): 47-49.
[14]	CHEN Zhiwei. Reasons analysis of accident of oil leakage into generator and preventive measures [J]. Huadian Technology, 2010, 32(8): 47-49.
[15]	ZHA Yongqiang. Analysis of oil leakage fault inside a generator and treatment [J]. Huadian Technology, 2010, 32(7): 51-52.

Analysis on elimination oil leakage fault of vacuum oil purifier by new centrifugal flash dehydration technology

Knowledge

Abstract

Cite this article

share this article

References

Related Articles 15

Recommended Articles

Metrics

Comments