660MW thermal power plant energy saving improvement control strategy

Abstract

Abstract:

To reduce steam turbine control valve throttle loss, steam distribution method was improved according to control valve flow characteristic test. After improvement, unit primary frequency modulation and automation generation control (AGC) responsiveness was weakened. To improve unit primary frequency modulation and AGC responsiveness, a technology that bring condensate water into primary frequency modulation and AGC was introduced. Unit capability of capacity variation was enhanced, and reduced control valve throttle loss. Energy saving operation was realized.

Key words:

steam turbine, control valve, throttle, condensate water, primary frequency modulation, automatic generation control, energy saving

ZENG Lilan.

660MW thermal power plant energy saving improvement control strategy

[J]. Huadian Technology, 2017, 39(10): 72-73.

[1]	SUN Na, DONG Haiying, CHEN Wei, MA Hulin. Secondary frequency modulation control strategy for large-scale grid-side energy storage devices in new power systems [J]. Integrated Intelligent Energy, 2024, 46(2): 59-67.
[2]	XU Jiang，ZHAO Zhifa，LI Jun. Optimization of feedwater temperature of 1000MW double reheat units [J]. Huadian Technology, 2020, 42(1): 78-80.
[3]	WANG Min1，WANG Jie2. Cause analysis and treatment of low vacuum of condenser in 660MW supercritical unit [J]. Huadian Technology, 2019, 41(3): 59-61.
[4]	SONG Xin. Analysis and solution for temperature fluctuation of turbine shaft seal steam [J]. Huadian Technology, 2019, 41(2): 46-48.
[5]	WANG Zhihui,SONG Zhiqiang,WANG Gangfeng,YU Yong. Cause analysis and treatment of steam flow excited vibration of steam turbine in Tongchuan Zhaojin Power Plant [J]. Huadian Technology, 2019, 41(2): 46-48.
[6]	SHANG Ziwen. Cause analysis of highlevel dissolved oxygen in condensate water of a 660MW unit [J]. Huadian Technology, 2018, 40(8): 34-35.
[7]	AN Zongwu1，MENG Yingqi1, LIU Chao1，LI Changhai1，WU Zhongsheng2. Fault analysis and treatment during commissioning period of a new 350MW supercritical heating unit [J]. Huadian Technology, 2018, 40(7): 50-53.
[8]	KE Zhao，HAO Han，WANG Gang. Optimization strategy of PCV valve control system for supercritical unit [J]. Huadian Technology, 2018, 40(6): 56-57.
[9]	DAI Xihui. Optimized design of automatic generation control system at plant level [J]. Huadian Technology, 2018, 40(5): 58-60.
[10]	ZHANG Yan. Research and application of water abstraction problem of power station boiler surplus heat utilization system [J]. Huadian Technology, 2018, 40(4): 22-24.
[11]	LIU Xiaoyan, WANG Wenzhong, OUYANG Jie, WEI Dongliang, XIE Lingui. Study on IP control valve of largescale steam turbine engaged in heat supply regulation [J]. Huadian Technology, 2018, 40(3): 9-12.
[12]	JIANG Jianwei. Feasibility study of alteration for pressure control valve inner structure in supercritical units [J]. Huadian Technology, 2018, 40(3): 13-16.
[13]	CHEN Chunhui，YAO Zhiwei，DONG Yi. Causes and control methods of cracks on mortar pad for steam turbine in the cold and dry environment [J]. Huadian Technology, 2018, 40(2): 10-12.
[14]	SUN Guoqiang. Cause analysis and preventive measures of steam turbine highpressure antifuel pipe fracture [J]. Huadian Technology, 2018, 40(12): 27-29.
[15]	YANG Chunming. Pneumatic control valve selection [J]. Huadian Technology, 2018, 40(1): 44-45.

660MW thermal power plant energy saving improvement control strategy

PDF

Knowledge

Abstract

Cite this article

share this article

References

Related Articles 15

Recommended Articles

Metrics

Comments