Analysis and treatment of overvibration of bearing bush in turbine rolling process

Huadian Technology ›› 2012, Vol. 34 ›› Issue (2): 62-64.

• 技术交流 • Previous Articles Next Articles

Analysis and treatment of overvibration of bearing bush in turbine rolling process

CAO Yusheng

Lianzhou Power Plant of Guangdong Lianzhou Yuelian Power Plant Company Limited, Lianzhou 513400, China

Received:1900-01-01 Revised:1900-01-01 Online:2012-02-25 Published:2012-02-25

Abstract

Abstract: In the Lianzhou Power Plant of Guangdong Lianzhou Yuelian Power Plant Company Limited, at the process of AC and DC oil pump test of the turbine lubrication oil system of unit No.2, the overpressure valve of the lubrication oil system was unable to reset normally and quickly; and this leaded to low oil pressure and tripping of the steam turbine. After this, in two times hotstate rolling processes of the steam turbine, the vibration of bearing bush No.1 was exceeded the standard, the turbine had been tripped. The main reasons of this fault and the exposed problems were analyzed, and the relevant preventive measures were put forward, which can be used as reference for other power plants.

Key words: steam turbine, lubrication oil, rolling, bearing bush, vibration, shut down

CAO Yusheng. Analysis and treatment of overvibration of bearing bush in turbine rolling process[J]. Huadian Technology, 2012, 34(2): 62-64.

[1]	TAN Zhiling, CHEN Caiming, XU Shengchao, WU Zhihong, SONG Yin, WANG Pengfei. Research on service life prediction on rolling bearings based on vibration signal analysis [J]. Huadian Technology, 2021, 43(5): 36-44.
[2]	HU Xiaolan, SONG Wei, PENG Chuansheng, LI Bo, JIANG Lihong, XIAO Zhaohui, HONG Keyan. Control and utilization of coal mine gas to achieve carbon peaking and carbon neutrality [J]. Huadian Technology, 2021, 43(12): 52-59.
[3]	CHENG Xueqing，SHI Jiayun. Treatment on excessive vibration of the main feedwater booster pump in a nuclear power plant [J]. Huadian Technology, 2020, 42(5): 83-88.
[4]	SUN Haifeng, WANG Zhaohui, WANG Jianfeng, HU Da, ZHU Yue. Analysis on safety and reliability of 600 MW supercritical units' deep peak regulation [J]. Huadian Technology, 2020, 42(12): 94-100.
[5]	HUANG Shaowei. Application of ACMD in fault diagnosis for bearings [J]. Huadian Technology, 2020, 42(1): 54-57.
[6]	XIA Huaipeng，WANG Zhengrong，WANG Yang，HU Xiaofu，WU Chong. Study on the structure design of quadrangle towerframe steel chimney [J]. Huadian Technology, 2019, 41(9): 22-24.
[7]	CHEN Hao，XU Junfeng. Influence of 600MW supercritical unit steam distribution characteristics on shaft vibration [J]. Huadian Technology, 2019, 41(9): 29-32.
[8]	LU Dingkang，ZHOU Wei. Analysis and treatment of abnormal vibration of industrial water pump [J]. Huadian Technology, 2019, 41(8): 78-80.
[9]	JIN Wei. Energysaving transformation of vacuum pump in 660MW steam turbine generator set  [J]. Huadian Technology, 2019, 41(7): 40-42.
[10]	CHEN Xiao，XU Wei，LIU Li，CHEN Xin. Analysis and treatment of abnormal vibration of a steam turbine of 600MW unit [J]. Huadian Technology, 2019, 41(7): 64-66.
[11]	WU Changhao，CAO Jingfang. Fault diagnosis and analysis of gear breaking of low speed balltube mill speed reducer [J]. Huadian Technology, 2019, 41(5): 69-72.
[12]	ZHOU Xinghong. Causes and treatment of overlimit bearing vibration of GE PG9171E heavyduty gas turbine [J]. Huadian Technology, 2019, 41(5): 76-77.
[13]	XIAN Jianwei，DAI Shujian. Analysis and treatment for fast scaling in 300MW subcritical steam turbine [J]. Huadian Technology, 2019, 41(5): 78-.80.
[14]	WANG Min1，WANG Jie2. Cause analysis and treatment of low vacuum of condenser in 660MW supercritical unit [J]. Huadian Technology, 2019, 41(3): 59-61.
[15]	SONG Xin. Analysis and solution for temperature fluctuation of turbine shaft seal steam [J]. Huadian Technology, 2019, 41(2): 46-48.

Analysis and treatment of overvibration of bearing bush in turbine rolling process

Knowledge

Abstract

Cite this article

share this article

References

Related Articles 15

Recommended Articles

Metrics

Comments