[1] |
XU X, BI L, ZHAO X S. Highly-conductive proton-conducting electrolyte membranes with a low sintering temperature for solid oxide fuel cells[J]. Journal of Membrane Science, 2018, 558:17-25.
doi: 10.1016/j.memsci.2018.04.037
|
[2] |
WU S, LIU Y, WANG C, et al. Cobalt-free LaNi0.4Zn0.1Fe0.5O3-δ as a cathode for solid oxide fuel cells using proton-conducting electrolyte[J]. International Journal of Hydrogen Energy, 2021, 46(77):38482-38489.
doi: 10.1016/j.ijhydene.2021.09.104
|
[3] |
XU X, WANG H, FRONZI M, et al. Tailoring cations in a perovskite cathode for proton-conducting solid oxide fuel cells with high performance[J]. Journal of Materials Chemistry, 2019, 7(36):20624-20632.
|
[4] |
IWAHARA H, ESAKA T, UCHIDA H, et al. Proton conduction in sintered oxides and its application to steam electrolysis for hydrogen production[J]. Solid State Ionics, 1981, 3:359-363.
|
[5] |
HOSSAIN S, ABDALLA A M, JAMAIN S N B, et al. A review on proton conducting electrolytes for clean energy and intermediate temperature-solid oxide fuel cells[J]. Renewable and Sustainable Energy Reviews, 2017, 79:750-764.
doi: 10.1016/j.rser.2017.05.147
|
[6] |
HAN D, UDA T. The best composition of an Y-doped BaZrO3 electrolyte:Selection criteria from transport properties, microstructure, and phase behavior[J]. Journal of Materials Chemistry, 2018, 6(38):18571-18582.
|
[7] |
HAN D, TOYOURA K, UDA T. Protonated BaZr0. 8Y0.2O3-δ:Impact of hydration on electrochemical conductivity and local crystal structure[J]. ACS Applied Energy Materials, 2021, 4(2):1666-1676.
doi: 10.1021/acsaem.0c02832
|
[8] |
MIAO L, HOU J, GONG Z, et al. A high-performance cobalt-free Ruddlesden—Popper phase cathode La1.2Sr0.8Ni0.6Fe0.4O4+δ for low temperature proton-conducting solid oxide fuel cells[J]. International Journal of Hydrogen Energy, 2019, 44(14):7531-7537.
doi: 10.1016/j.ijhydene.2019.01.255
|
[9] |
SHAN D, GONG Z, WU Y, et al. A novel BaCe0.5Fe0.3Bi0.2O3-δ perovskite-type cathode for proton-conducting solid oxide fuel cells[J]. Ceramics International, 2017, 43(4):3660-3663.
doi: 10.1016/j.ceramint.2016.11.206
|
[10] |
ZHOU X, HOU N, GAN T, et al. Enhanced oxygen reduction reaction activity of BaCe0.2Fe0.8O3-δ cathode for proton-conducting solid oxide fuel cells via Pr-doping[J]. Journal of Power Sources, 2021, 495:229776.
doi: 10.1016/j.jpowsour.2021.229776
|
[11] |
ZHANG L, YIN Y, XU Y, et al. Tailoring Sr2Fe1.5Mo0.5O6-δ with Sc as a new single-phase cathode for proton-conducting solid oxide fuel cells[J]. Science China Materials, 2022, 65(6):1485-1494.
doi: 10.1007/s40843-021-1935-5
|
[12] |
RAINWATER B H, LIU M, LIU M. A more efficient anode microstructure for SOFC based on proton conductors[J]. International Journal of Hydrogen Energy, 2012, 37(23):18342-18348.
doi: 10.1016/j.ijhydene.2012.09.027
|
[13] |
HAN D, KURAMITSU A, ONISHI T, et al. Fabrication of protonic ceramic fuel cells via infiltration with Ni nanoparticles:A new strategy to suppress NiO diffusion & increase open circuit voltage[J]. Solid State Ionics, 2020, 345:115189.
doi: 10.1016/j.ssi.2019.115189
|
[14] |
BI L, FABBRI E, TRAVERSA E. Effect of anode functional layer on the performance of proton-conducting solid oxide fuel cells (SOFC)[J]. Electrochemistry Communications, 2012, 16(1):37-40.
doi: 10.1016/j.elecom.2011.12.023
|
[15] |
TAHIR N N M, BAHARUDDIN N A, SAMAT A A, et al. A review on cathode materials for conventional and proton-conducting solid oxide fuel cells[J]. Journal of Alloys and Compounds, 2022, 894:162458.
doi: 10.1016/j.jallcom.2021.162458
|
[16] |
ZHU K, YANG Y, HUAN D, et al. Theoretical and experimental investigations on K-doped SrCo0.9Nb0.1O3-δ as a promising cathode for proton-conducting solid oxide fuel cells[J]. ChemSusChem, 2021, 14(18):3876-3886.
doi: 10.1002/cssc.202101100
|
[17] |
XU X, XU Y, MA J, et al. Tailoring electronic structure of perovskite cathode for proton-conducting solid oxide fuel cells with high performance[J]. Journal of Power Sources, 2021, 489:229486.
doi: 10.1016/j.jpowsour.2021.229486
|