磨煤机钢球装载量对机组制粉系统的影响分析

华电技术 ›› 2012, Vol. 34 ›› Issue (6): 30-32.

磨煤机钢球装载量对机组制粉系统的影响分析

丛晓蓉1，张志刚2，张湘禹3，尹民权4

1.中国华电工程(集团)有限公司，北京100035；2.北京国电龙源环保工程有限公司，北京100039；3.河南第一火电建设公司，河南郑州450012；4.华电国际邹县发电厂，山东邹城273422

收稿日期:1900-01-01 修回日期:1900-01-01 出版日期:2012-06-25

Analysis about influence of steel ball amount loaded in mill on pulverizing system of unit

CONG Xiaorong1, ZHANG Zhigang2, ZHANG Xiangyu3, YIN Minquan4

1.China Huadian Engineering Corporation Limited, Beijing 100035, China; 2.Beijing Guodian Longyuan Environmental Engineering Company Limited, Beijing 100039, China; 3.Henan No.1 Thermal Power Construction Company, Zhengzhou 450012, China; 4. Huadian International Zouxian Power Plant, Zoucheng 273422, China

Received:1900-01-01 Revised:1900-01-01 Published:2012-06-25

摘要/Abstract

摘要： 为了降低某电厂厂用电率并提高磨煤机的可靠性，结合其他电厂的经验，分析了磨煤机的运行情况，论述了磨煤机钢球最佳装载量对制粉系统的影响。通过调整钢球装载量，降低了机组电耗，提升了机组运行的经济性。

关键词: 燃煤汽包锅炉, 磨煤机, 钢球装载量, 状态诊断, 最佳装载量

Abstract: In order to reduce the house service consumption rate of a power plant and to increase the reliability of the coal mill, combining with the experiences of other power plants, the operation of the coal mill was analyzed; and the influences of the optimal steel ball amount loaded in coal mill on the pulverizing system of the unit were expounded. By adjustment of the steel ball amount loaded in the coal mill, the power consumption of the unit was reduced, and the economical efficiency of the unit operation was improved.

Key words: coal-fired drum boiler, coal mill, steel ball amount loaded in coal mill, state diagnosis, optimal steel ball amount loaded in coal mill

丛晓蓉;张志刚;张湘禹;尹民权. 磨煤机钢球装载量对机组制粉系统的影响分析[J]. 华电技术, 2012, 34(6): 30-32.

CONG Xiaorong;ZHANG Zhigang;ZHANG Xiangyu;YIN Minquan. Analysis about influence of steel ball amount loaded in mill on pulverizing system of unit[J]. Huadian Technology, 2012, 34(6): 30-32.

[1]	邓振宇, 汪茹康, 徐钢, 云昆, 王颖. 综合能源系统中热电联产机组故障预警现状[J]. 综合智慧能源, 2024, 46(8): 67-76.
[2]	张海龙，杨光锐，井新经，邢乐强，刘超，党黎军. 中速磨煤机直吹式制粉系统节能优化研究[J]. 华电技术, 2020, 42(6): 25-30.
[3]	万立明1，梅振锋2，李德波3，苏朋1，邱家煜1. 中速磨煤机入口紧凑型圆形一次风道流场均流技术研究[J]. 华电技术, 2019, 41(6): 6-12.
[4]	王周君1,2，黎星华2，唐立军1，段泉圣2. 中速磨煤机入口一次风混流及均流技术研究[J]. 华电技术, 2019, 41(5): 17-21.
[5]	吴昌浩，曹景芳. 低速钢球磨煤机减速机齿轮断齿故障诊断及分析[J]. 华电技术, 2019, 41(5): 69-72.
[6]	许伟强，刘翔. 配置双进双出磨煤机的超临界机组入炉煤量计算方法及应用[J]. 华电技术, 2018, 40(7): 10-13.
[7]	冯培峰1，王林2，刘晓莎3. 等离子点火装置配套改造与效益分析[J]. 华电技术, 2018, 40(3): 24-26.
[8]	王晓杰. 振动料位分析技术在钢球磨煤机中的应用[J]. 华电技术, 2018, 40(3): 36-38.
[9]	李杰义1，谭厚章2，韩瑞午2，李兵1，甄志广1，郑海国3，杨浩3. 300MW机组双进双出磨煤机分离器改造优化[J]. 华电技术, 2017, 39(6): 23-24.
[10]	熊峰. 某600MW发电厂锅炉制粉系统出力不足原因分析[J]. 华电技术, 2017, 39(6): 51-54.
[11]	郑希峰，吕贞贞. 碗式中速磨煤机制粉系统整体性能优化研究与应用[J]. 华电技术, 2017, 39(3): 25-27.
[12]	桑长勇，杜福明，高全海，李新建. BBD3854磨煤机螺旋输送器故障原因分析与对策[J]. 华电技术, 2017, 39(3): 57-59.
[13]	李有信. 直吹式制粉系统粉管堵塞试验测试及处理[J]. 华电技术, 2017, 39(1): 38-39.
[14]	徐启，李乔乔，潘萌萌. 中速磨煤机直吹式制粉系统干燥剂和通风量计算分析[J]. 华电技术, 2016, 38(5): 57-60.
[15]	冯锦. ZGM-I-Ⅱ-Ⅲ型与MPS-HP-Ⅱ型磨煤机的设备选型[J]. 华电技术, 2016, 38(4): 30-31.