华电技术 ›› 2013, Vol. 35 ›› Issue (5): 22-24.

• 研究与开发 • 上一篇    下一篇

核电站、火电厂水工系统优化设计和应用

杨满成,周金全   

  1. (中国华电工程(集团)有限公司,北京 100035)
  • 收稿日期:1900-01-01 修回日期:1900-01-01 出版日期:2013-05-25 发布日期:2013-05-25

Optimized design and application of water engineering system for nuclear power station and fossil fuelfired power plant

YANG Mancheng, ZHOU Jinquan   

  1. (China Huadian Engineering Corporation Limited, Beijing 100035, China)
  • Received:1900-01-01 Revised:1900-01-01 Online:2013-05-25 Published:2013-05-25

摘要: 对秦山核电二期工程取排水口位置和取水工程形式进行了优化,在北方富煤缺水地区火电厂建设中,采用直接和间接空冷类型机组,利用城市污水处理厂的中水作为电厂的补充用水,对厂内水系统采用水处理岛布置形式等实例进行了分析,论述了核电站和火电厂水工系统优化设计的必要性,可为今后类似电站(厂)的水工系统设计提供参考。

关键词: 空冷机组, 城市中水, 取排水口位置, 水处理岛, 优化设计

Abstract: The positions of the water intake inlet and the water discharge outlet of Qinshan Nuclear Power Station project phase II and the form of water intake engineering were optimized. Some practical examples in thermal power plant construction in the northern region, the rich in coal and waterdeficient region, were analyzed, which include to adopt direct or indirect air cooled unit, to utilize the urban reclaimed water from the sewage treatment plant as supplement water for power plant, to adopt the form of water treating island to arrange the water system of the power plant and so on. The necessity of optimized design of water engineering system for thermal power plant and nuclear power station was expounded. The result of this paper provides reference for similar power plants in water engineering system design.

Key words: air cooled unit, urban reclaimed water, positions of water intake inlet and water discharge outlet, water treating island, optimized design