越南660MW燃煤电厂采用无油点火系统的可行性研究

华电技术 ›› 2015, Vol. 37 ›› Issue (3): 68-70.

越南660MW燃煤电厂采用无油点火系统的可行性研究

(中国华电工程(集团)有限公司海外分公司，北京〓100160)

出版日期:2015-03-25

Research on feasibility of applying oilfree ignition system in 600MW coalfired power plant in Vietnam

(Oversea Branch of China Huadian Engineering Corporation Limited, Beijing 100160, China)

Published:2015-03-25

摘要/Abstract

摘要： 摘要：越南沿海二期660MW火电项目燃煤为高挥发分煤，煤源相对稳定。通过分析燃料的着火特性、燃尽特性及结渣特性，对该项目采用等离子体点火系统、取消燃油系统、建设无燃油电厂的可行性进行研究。经估算，取消燃油系统并安装等离子体点火系统后，每台机组试运行期间可节省费用2650万元。

关键词: 关键词：燃煤电厂, 等离子体点火, 无油点火, 着火特性

Abstract: Abstract:The coal for Duyen Hai II Coalfired Power Plant in Vietnam is higher volatile coal, and the coal supply is relative stable. Based on analysis of the burning characteristics, the burnout characteristics and the slagging characteristics of the coal, the feasibility to apply the plasma ignition system, to cancel the fuel oil system and to construct oilfree coalfired power plant is researched. Based on estimation, after the fuel oil system was cancelled and the plasma ignition system was installed, the cost of one unit during commissioning period can be reduced by 26.5 millions Yuan. 

Key words: Keywords:coalfired power plant, plasma ignition, oilfree ignition, burning characteristics

蒋方帅，于文波. 越南660MW燃煤电厂采用无油点火系统的可行性研究[J]. 华电技术, 2015, 37(3): 68-70.

JIANG Fangshuai, YU Wenbo. Research on feasibility of applying oilfree ignition system in 600MW coalfired power plant in Vietnam[J]. Huadian Technology, 2015, 37(3): 68-70.

[1]	孙刘涛, 闫永宏, 陈登科, 彭政康, 孙锐. 燃烧器钝体扩展角度对半焦/烟煤混燃及NOx排放的影响[J]. 华电技术, 2020, 42(7): 20-27.
[2]	闫永宏, 陈登科, 孙刘涛, 彭政康, 孙锐. 粒径对热解半焦和烟煤掺混燃烧特性的影响和试验研究[J]. 华电技术, 2020, 42(7): 1-10.
[3]	王凯亮，李善龙，汪洋，陶爱平. 燃煤电厂环保岛烟气超低排放技术[J]. 华电技术, 2016, 38(9): 4-7.
[4]	张耀军，张国军，宣大宇. 卧式氨储罐储氨量计算[J]. 华电技术, 2016, 38(5): 61-63.
[5]	朱晨曦1，李苇林2，郑迎九1，沈煜晖2，杨彭飞2. 燃煤电厂联合脱硝SCR系统流场模拟研究和实践[J]. 华电技术, 2015, 37(6): 1-4.
[6]	孙永. 火车入厂煤采制样装置机械结构优化设计[J]. 华电技术, 2015, 37(12): 10-14.
[7]	胡永锋１，梁新磊２. 燃煤电厂ＳＣＲ法烟气脱硝装置常见问题及原因分析[J]. 华电技术, 2015, 37(11): 62-64.
[8]	冯伟. 燃煤电厂设备耐磨防腐材料应用现状及展望[J]. 华电技术, 2014, 36(4): 38-40.