Analysis of oil leakage of hydraulic turbine runner and reformation

Huadian Technology ›› 2010, Vol. 32 ›› Issue (3): 67-69.

• 技术交流 • Previous Articles Next Articles

Analysis of oil leakage of hydraulic turbine runner and reformation

LIU Xiaoyun

Hunan Wuling Electric Engineering Corporation Limited of Wuling Electric Power Corporation Limited, Changsha 410004, China

Received:1900-01-01 Revised:1900-01-01 Online:2010-03-25 Published:2010-03-25

Abstract

Abstract: The oil leakage of runner of unit number 1 in Hongjiang Hydropower Plant was introduced. By analysis, it is determined that the oil leakage was occurred in seal of runner paddle. A treatment scheme of replacing the material of paddle shaft sleeve was proposed and implemented. After the reformation, the paddle moved flexibly and stably, and the oil leakage of paddle seal was not found, and the unit operated safely and reliably.

Key words: hydraulic turbine, runner, oil leakage, aluminum bronze

LIU Xiaoyun. Analysis of oil leakage of hydraulic turbine runner and reformation[J]. Huadian Technology, 2010, 32(3): 67-69.

[1]	WANG Lijie，WANG Hongteng，SUN Bo. Operation region partition for hydraulic turbine generator units based on stability test data [J]. Huadian Technology, 2020, 42(6): 6-9.
[2]	. Analysis and experimental study on factors affecting power generation by river current [J]. Huadian Technology, 2020, 42(2): 76-80.
[3]	YANG Zhinan. The analysis and processing of signal such as V/F limitation in the starting process of a hydroelectric unit [J]. Huadian Technology, 2018, 40(4): 34-35.
[4]	LI Tao. The treatment scheme of oil leakage for contact seal of thrust external circulation pump [J]. Huadian Technology, 2016, 38(3): 64-65.
[5]	LIU Jiawen. Analysis and treatment of cracks on hydraulic turbine runner [J]. Huadian Technology, 2015, 37(3): 54-55.
[6]	TIAN Lun. Operation practice of hydraulic turbine governor power mode in Suofengying Hydropower Plant [J]. Huadian Technology, 2014, 36(8): 52-54.
[7]	ZHAO Zhixiang 1, WANG Wenbing 2 . Analysis on elimination oil leakage fault of vacuum oil purifier by new centrifugal flash dehydration technology [J]. Huadian Technology, 2014, 36(5): 21-22.
[8]	ZENG Junquan. Analysis on reasons of sealing oil leakage into generator and preventive measures [J]. Huadian Technology, 2013, 35(8): 49-51.
[9]	DONG Lin;ZENG Yajie;MA Yong. Problems occurred during commissioning of 660 MW Heller indirect air cooling unit and treatment measures [J]. Huadian Technology, 2013, 35(1): 38-41.
[10]	LIAO Jiajun;FAN Yu;WANG Xing. Simulation analysis on setup of vents for magneticlevitation bearing device of hydraulic turbinegenerator unit and its affect [J]. Huadian Technology, 2012, 34(9): 10-13.
[11]	GUO Shitian. Analysis and treatment of the overtemperature of hydraulic turbine guide bearing [J]. Huadian Technology, 2011, 33(12): 24-27.
[12]	CHEN Zhiwei. Reasons analysis of accident of oil leakage into generator and preventive measures [J]. Huadian Technology, 2010, 32(8): 47-49.
[13]	ZHA Yongqiang. Analysis of oil leakage fault inside a generator and treatment [J]. Huadian Technology, 2010, 32(7): 51-52.
[14]	ZHANG Wei. reatment of oil leakage of combination bearing in bulb tubulous turbine generation unit [J]. Huadian Technology, 2010, 32(2): 60-62.
[15]	LIANG Wei. Analysis of cracks in wheel blades of hydraulic turbine and strength enhancing [J]. Huadian Technology, 2010, 32(2): 63-66.

Analysis of oil leakage of hydraulic turbine runner and reformation

Knowledge

Abstract

Cite this article

share this article

References

Related Articles 15

Recommended Articles

Metrics

Comments