Measurement and adjustment for total axial drifting value and working clearance of CHTC5/5SP2 feed pump

Abstract

Abstract: The measurement and adjustment of total axial drifting value and working clearance of feed pump are the important links in feed pump overhaul; and its basic purpose is to make the feed pump impeller to be always in accordance with the center position of the guide vane slot and avoid the friction between the rotating part and the static part of the pump; which will be helpful to enhancing the pump efficiency. According to the equilibrium principle of feed pump, starting from the measurement and adjustment of the axial thrust, combining with the practical working experience, the problems on enhancing the feed pump overhaul quality were expounded. 

Key words: axial force, axial drifting value, clearance, adjustment, measurement method

HUANG Xianhua. Measurement and adjustment for total axial drifting value and working clearance of CHTC5/5SP2 feed pump[J]. Huadian Technology, 2011, 33(3): 60-61.

[1]	WEI Yanping, WANG Jun, LI Nanfan, SHI Changli. Prediction model of stochastic power in industrial parks based on Markov chain [J]. Integrated Intelligent Energy, 2023, 45(1): 14-22.
[2]	JI Bin, SUN Hui, CHANG Li, ZHANG Dandan. Modeling and analysis on decision making behavior of loyal users participating in demand-side response [J]. Integrated Intelligent Energy, 2022, 44(2): 80-88.
[3]	WANG Yunpeng,DUAN Xiaoyun. Retrofit and combustion adjustment of a lownitrogen burner in a 330MW cogeneration unit [J]. Huadian Technology, 2020, 42(6): 35-42.
[4]	DING Yang，HAO Jiangang，XIE Daxing. Numerical analysis on 9E gas turbine DLN1.0 combustion system [J]. Huadian Technology, 2020, 42(5): 31-36.
[5]	YANG Yuzhu，XU Wei. Cause analysis and preventive measures of abnormal regulation of AGC in a power plant [J]. Huadian Technology, 2019, 41(7): 77-79.
[6]	ZHANG Tianhai1，YU Guoqiang1，SHU Jianjun1，TANG Keyi1，ZHU Yongjiu2. Research on control strategy of highpressure heater system for ultrasupercritical secondary reheat unit [J]. Huadian Technology, 2019, 41(3): 35-39.
[7]	XU Jingjing，KANG Hui，ZHANG Ruihan. Clean coal heatsupply and integrated energy utilization [J]. Huadian Technology, 2019, 41(11): 36-39.
[8]	REN Xinsheng. Practice of centralizing and intelligent transformation on heating supply of thermal power enterprises [J]. Huadian Technology, 2019, 41(11): 70-75.
[9]	LIU Guanjun. Axial clearance calculation and differential expansion analysis of Dongfang Turbine Company Limited X300P turbine [J]. Huadian Technology, 2019, 41(1): 40-44.
[10]	YU Yong. Adjustment process of gland sealing clearance of 600MW steam turbine full solid cylinder [J]. Huadian Technology, 2018, 40(9): 44-46.
[11]	. Cause analysis and treatment on vibration abnormality of cogeneration steam turbine generator sets [J]. Huadian Technology, 2018, 40(8): 42-43.
[12]	CHEN Jianfei. Analysis and treatment of high temperature of bearing of primary air fan motor in 660MW singleseries unit [J]. Huadian Technology, 2018, 40(6): 58-59.
[13]	REN Liang. Keywords:direct air cooling; operation and adjustment; antifreezing [J]. Huadian Technology, 2018, 40(5): 53-55.
[14]	DONG Shumei1, YU Li1, DU Juhu2. Design and application of water level measurement system for boiler drum of waste heat boiler in distributed energy station [J]. Huadian Technology, 2018, 40(5): 70-72.
[15]	LIU Ensheng1, ZHOU Xingang2. Reason analysis and improvement on the blades fault of twostage adjustable moving blade axial flow draft fan [J]. Huadian Technology, 2018, 40(2): 50-51.

Measurement and adjustment for total axial drifting value and working clearance of CHTC5/5SP2 feed pump

Knowledge

Abstract

Cite this article

share this article

References

Related Articles 15

Recommended Articles

Metrics

Comments