Integrated Intelligent Energy ›› 2026, Vol. 48 ›› Issue (2): 27-36.doi: 10.3969/j.issn.2097-0706.2026.02.003

• Maintanence and Inspection based on AI • Previous Articles     Next Articles

Research on distribution network fault identification method based on multi-source feature fusion denoising network

CUI Xianghu1(), XU Yuefei1(), QI Jiajin1(), ZHANG Jing1(), CHEN Shizhe1(), LI Jinnuo2,*()   

  1. 1. Hangzhou Electric Power Equipment Manufacturing Company LimitedHangzhou 310020, China
    2. School of Mechanical EngineeringNortheast Electric Power UniversityJilin 132012, China
  • Received:2025-09-22 Revised:2025-10-24 Published:2026-02-25
  • Contact: LI Jinnuo E-mail:99522570@qq.com;xu13868011898@163.com;qijiajin@126.com;331029160@qq.com;370469588@qq.com;lijinnuo12@163.com

Abstract:

To address the issues that fault features are easily obscured by noise and single features can hardly capture comprehensive fault information during distribution network fault identification,a distribution network fault identification method based on multi-source feature fusion denoising network was proposed. The discrete wavelet transform (DWT)was used to decompose the normalized zero-sequence voltage and three-phase current signals at multiple scales,and the original signals were reconstructed into high-frequency and low-frequency components to mitigate the influence of feature aliasing. In the high-frequency component,the time-frequency residual adaptive denoising module was constructed,and Fourier convolution was embedded to extract high-frequency features with rich frequency-domain information. Combined with the channel attention mechanism,the accurate denoising of the signal was achieved. In the low-frequency branch,a lightweight convolutional network was designed to extract the temporal features of the low-frequency components to enhance the complementarity of the time-frequency information. A temporal-channel attention mechanism was introduced for the adaptive feature fusion,which enhanced the feature extraction capability while suppressing the redundant features,thus enabling the accurate diagnosis of the fault types under the complex working conditions. The experimental results showed that the proposed method achieved an accuracy of 99.12% in the simulation dataset,which significantly improved the accuracy of fault identification compared with the existing methods.

Key words: distribution network fault identification, multi-source feature fusion, Fourier convolution, adaptive denoising, temporal-channel attention mechanism

CLC Number: